1-½ in. NPT Inlet/Outlet, Self-Priming Cast Iron Centrifugal Pump, 3/4 HP, ODP or TEFC, 115/230V or 230/460V AC, Single or Three Phase, AMT Pumps, Model# 2825-95, 282D-95 & 282F-95

Only $388.70

Factory Shipped

Please Choose:


Share this product:

AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8 in. diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Cast Iron model offer durability, high quality and value that continue to set the standard in the industry.

AMT centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.

  • Cast iron construction with Buna-N seals, Max temperature 180°F
  • Dual volute design
  • Handles 3/8 in. diameter semi-solids
  • Self cleaning, clog resistant impeller
  • Built in flapper/check valve
  • Steel base and handle
  • Available in ODP or TEFC, single or three phase depending on model
  • Self-primes to 20 ft.

For proper operation of this pump, it is a requirement to check the chemical resistance chart before ordering. If the pump is used for an application that the pump material is not compatible with the warranty will be voided.

Chemical Resistance Chart

Features & Specifications

    3/4 HP ODP 115/230 Volt - Model 2825-95

  • HP Class: 3/4
  • Type: ODP
  • Frame: 56J
  • Voltage @ 60 Hz: 115/230
  • Phase: 1
  • Casting Construction: Cast Iron
  • Ship Weight: 55
  • Model No.: 2825-95

    3/4 HP TEFC 115/230 Volt - Model 282D-95

  • HP Class: 3/4
  • Type: TEFC
  • Frame: 56J
  • Voltage @ 60 Hz: 115/230
  • Phase: 1
  • Casting Construction: Cast Iron
  • Ship Weight: 52
  • Model No.: 282D-95

    3/4 HP TEFC 230/460 Volt - Model 282F-95

  • HP Class: 3/4
  • Type: TEFC
  • Frame: 56J
  • Voltage @ 60 Hz: 230/460
  • Phase: 3
  • Casting Construction: Cast Iron
  • Ship Weight: 49
  • Model No.: 282F-95

Dimensions & Performance

ModelCurvePHENCVoltage @ 60 Hz +Full Load Amps (FLA)L**W**H

(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
(+) 3-Phase models can also operate on 50 Hz (This will change full load amps and service factor, RPM and priming capabilities).
NOTE: Dimensions are in inches and have a tolerance of ±1/4 in.
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).

Copyright © 2015 Westech Equipment