AMT 5765-95 & 5766-95 & 576D-95 Submersible Shredder Sewage Pumps
AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.
AMT Submersible Shredder Sewage Pumps are reliable, cost effective, and provide low maintenance. For use with non-flammable liquids compatible with pump component materials.
- Cast Iron Construction
- Stainless Steel Motor Housing
- Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability
- Double Mechanical Seal with Carbide Lower Seal
- Carbide Tipped Impeller
- UL/CSA Listed
- Suction Screen
- Carry Handle Built In
- 104°F Max Temperature
Stop! Required before ordering:
Unless specified above, all pumps are for water use only and are not to be used for any other purpose.
If you are selecting a pump that is designed for pumping products other than water, please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
Features & Specifications
3 HP 4 in. Port Cast Iron - 5765-95
3 HP 4 in. Port Cast Iron - 5766-95
3 HP 4 in. Port Cast Iron - 576D-95
Dimensions & Performance
|Model #||Curve||PH||Voltage @ 60 Hz||Full Load Amps||A||B||C§||D||W||H|
(*) Standard NPT (Female) Pipe Thread
NOTE: Dimensions are in inches and have a tolerance of ±1/8 in.
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage (Ex: 230V = 203 to 253)
(§) Minimum Liquid Height