Is your order time-sensitive? Send us an email or call us to see which suppliers are experiencing material shortages or delayed shipping times.

Coalescer Cartridges

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

Facet CA Series 3 Coalescer Cartridges

Qualified to API-1581, 6 in. OD, Screw Base or Rod Mounting, Flow Direction: Inside to Outside

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price Qty
CA22-3SB 6 in. x 22 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $240.70
CA28-3SB 6 in. x 28 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $245.70
CA33-3SB 6 in. x 33 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $306.02
CA38-3SB 38 in. Length, Screw Base Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $318.89
CA43-3 43 in. Length, Rod Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $258.52
CA43-3SB 43 in. Length, Screw Base Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $266.11
CA56-3 56 in. Length, Rod Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $358.07
CA56-3SB 56 in. Length, Screw Base Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside $383.62
Contact Us
Facet - CA Series 3 - Coalescer Cartridges

Facet CA series 3 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.

The Facet coalescer separator housings equipped with CA Series 3 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements of API Bulletin 1581, Third Edition, Groups I and II, Classes A, B and C.

Built for balanced fluid flow-thru and structural strength, each CA Series 3 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal center tube-all encased in an outer sock material. All are 6 in. OD (152 mm) by 3.5 in. ID (89 mm) and available in standard interchangeable nominal lengths in increments from 11.25 in. (290 mm) to 57.25 in. (1450 mm).

The CA Series 3 coalescer cartridges are available in two cartridge mounting styles; self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance-uniform threads, no shrinkage, no galling and no gasket to recover.

A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.

Features
  • Tested and qualified to the Third Edition of API Bulletin 1581, Group II, Classes A, B and C
  • Multi-layered media for increased solids holding capacity
  • Ultra-fine solids removal
  • Maximum water coalescence
  • Balanced cartridge flow characteristics
  • Recommended maximum operating temperature: 240°F (115°C)
  • Withstands in excess of 75 psi (517 kPa) differential pressure
  • pH range from 5 to 9
  • Choice of self-centering rod or screw base coalescer cartridge mounting styles
    Materials:
  • All metal components are treated against corrosion
  • Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
  • Buna-N gaskets -- other materials are available on request