*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Facet CM Series Coalescer Cartridges
Screw Base or Rod Mounting
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| CM-14SB-5 | 6 in. x 15 in. | $181.44 | |
| CM-22SB-5 | 6 in. x 23 in. | $241.77 | |
| CM-28SB-5 | 6 in. x 29 in. | $288.11 | |
| CM-33SB-5 | 6 in. x 34 in. | $268.87 | |
| CM-38SB-5 | 6 in. x 39 in. | $291.89 | |
| CM-43SB-5 | 6 in. x 45 in., Flow Direction: Inside to Outside | $316.93 | |
| CM-56SB-5 | 6 in. x 57 in., Flow Direction: Inside to Outside | $423.68 | |
| CM-22-5 | 22 in. Length, Rod Mounting | $256.41 | |
| CM-28-5 | 28 in. Length, Rod Mounting | $283.00 | |
| CM-33-5 | 33 in. Length, Rod Mounting | $303.17 | |
| CM-38-5 | 38 in. Length, Rod Mounting | $320.63 | |
| CM-43-5 | 43 in. Length, Rod Mounting | $319.70 | |
| CM-56-5 | 56 in. Length, Rod Mounting | $475.81 |
Facet - CM Series - Coalescer Cartridges
Facet CM Series coalescer cartridges offer the finest
performance available. This line of high flow
coalescer cartridges removes ultra-fine solids and
enhances separation of water from jet fuel.
The Facet coalescer separator housings equipped
with CM Series coalescer and companion separator
cartridges have been tested and fully qualified
to EI 1581, Fifth Edition, for category "M", in both
vertical and horizontal orientations.
Built for balanced fluid flow-thru and structural
strength, each CM Series coalescer cartridge is a
single piece construction of various combined
media, precisely arranged in many layers and
pleats, wrapped around a coated, perforated metal
center tube- all encased in an outer sock material.
All are 6 in. OD (152mm) by 3.5 in. ID (89mm) and
available in standard interchangeable nominal
lengths in increments from 11.25 in. (290mm) to
57.25 in. (1450mm).
The CM Series 5 colaescer cartridges are available
in two cartridge mounting styles; self-centering rod
mount and screw base. The rod mount style has
treated metal end caps, while the screw base ends
are injection molded, glass-filled nylon. This screw
base material offers superior strength and ease of
maintenance- uniform threads, no shrinkage, no
galling and no gasket recover.
A permanently affixed Buna gasket seals against the
V-type knife edge mounting adaptor to provide a
positive seal. It will not separate from the cartridge
during installation or change out.
Standard Features
- Tested and qualified to the Fifth Edition of EI 1581 for all category "M"
- Multi-layered media for increased solids holding capacity
- Ultra-fine solids removal
- Maximum water coalescence
- Balanced cartridge flow characteristics
- Recommended maximum operating temperature: 240°F (115°C)
- Withstands excess of 75 psi differential pressure
- pH range from 5 to 9
- Choice of self-centering rod or screw base coalescer cartridge mounting styles
- MATERIALS
- All metal components are treated against corrosion
- Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
- Buna-N gaskets-other materials are available upon request