*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Challenger Lifts EV1220 Series Envirolift Cassette-Style Inground Lifts
12,000 lb. Capacity, 81.25 in. Rise HeightOnline Ordering Unavailable. Call for Quote.
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| EV1220-QC | 12,000 lb. Capacity, 81.25 in. Rise Height, 3-Stage Arms with Quick CycleOnline Ordering Unavailable. Call for Quote. | $14,198.39 | |
| EV1220-BMC-QC | 12,000 lb. Capacity, 81.25 in. Rise Height, 3-Stage Arms with Quick Cycle, Packaged with Bench Mounted ControlsOnline Ordering Unavailable. Call for Quote. | $14,963.83 |
Add Optional Accessories
| Model # | Description | Price | Qty |
|---|---|---|---|
| 15060 | Floor Mounted Power Unit Stand for EV1020 and EV1220 | $250.01 | |
| CSGREASE | Grease for Electric/Hydraulic Cassette Lifts (CS and EV Series) | $44.39 |
Challenger Lifts - EV1220 Series - Envirolift Cassette-Style Inground Lifts
The NEW EV1220 heavy-duty inground vehicle lifts are ideal for starting or expanding your commercial fleet service capabilities. Heavy-Duty Inground Vehicle Lifts require less shop space than surface mounted lifts, maximizing the number of service bays.
The EV1220 inground vehicle lifts are equipped with standard, medium and high extension stack adapters to accommodate a wide variety of Heavy-Duty vehicle lift points. Challenger Heavy-Duty Inground Vehicle Lifts are fully contained in a recycled polymer housing to protect your investment and the environment.
With over 50% more bearing contact surface than competitor's vehicle lifts, enhanced wipers both top and bottom and NEW larger 8-1/2" chrome pistons, your shop will have a superior, more stable and repeatable lift resulting in increased productivity.
The traditional EV1220 inground lifts come standard with Part# 10315 Stack Adapter Extension Kit and #10318 Four Frame Engaging Truck Adapters. Frame engaging adapters (Part #10314 or 10318) are REQUIRED when lifting vehicles with frame construction.
 | NEW larger 8 1/2" chrome diameter piston provides greater stability. |  | Stainless Steel air lock release cylinder promotes longer working life with its corrosion resistant design. |
 | NEW enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings. |  | Fully contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground. |
 | Over 50% longer bearing contact than competitor lifts provides increased stability. |  | Standard combination stack screw pads accommodate a wide range of vehicle pick up points |
 | Mechanical lock engages every 3" provides safety and allows technician to work at their ergonomic height to increase productivity and minimizes fatigue. |
| Model Number | EV1220 |
|---|---|
| Lifting Capacity | 12,000 lb. (5442kg) |
| Stroke | 68" (1727mm) |
| A Rise Height1 | 81-1/4" (2064mm) |
| B Width Overall | 99" (2515mm) |
| C Drive-Thru Clearance | 87" (2210mm) |
| D Reach (Arm Minimum) | 32" (813mm) |
| E Reach (Arm Maximum) | 49-1/4" (1251mm) |
| F Adj. Adapter Height2 | 5 - 7-1/4" (127 - 184mm) |
| G Adj. Adapter Height2 (with Medium Extensions)2 | 8 - 10-1/4" (203 - 260mm) |
| H Adj. Adapter Height (with High Extensions)2 | 11" - 13-1/4" (289 - 337mm) |
| Capacity (Per Arm) | 3000 lbs (1361kg) |
| Guide Plunger Diameter | 8-1/2 (216mm) |
| Motor | 2HP |
| Voltage (Single Phase Std.)3 | 208v-230v |
| Speed of Rise | 60 Sec. |
| Air Required | 75-125 psi |
| Celing Height Required | 82" (2083mm) Plus height of tallest vehicle |
1 Rise Height is measured with superstructure in highest position.
2 Medium and high auxiliary adapter extensions are standard.
3 Optional 3 phase electrical also available. Specify at time of order.
Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.
