*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 3156-95 Heavy Duty Straight Centrifugal Pump
2 in. Inlet 1-1/2 in. Outlet, Single Phase, Cast Iron Construction, 170 Max GPM, 2 HP
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 3156-95 | 2 in. Inlet 1-1/2 in. Outlet, Single Phase, Cast Iron Construction, 170 Max GPM, 2 HP | $748.34 |
AMT Pumps - 3156-95 - Heavy Duty Straight Centrifugal Pump
AMT Heavy Duty Straight Centrifugal pumps are suited for liquid transfer, heating and cooling, recirculation, booster service and other industrial applications. Stainless Steel units are especially effective in applications where rust and/or corrosion can develop in systems. Semi-open impeller features self-cleaning ability. Vent and drain plugs for all positions. All models feature an optional seal wash to rinse salt water from seal cavity. Pumps are not self-priming and require flooded suction.
AMT Heavy Duty Straight Centrifugal pumps are reliable, cost effective and low maintenance. Many are readily available "Off-the-Shelf" for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
Stop! Required before ordering:
Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
- Cast Iron Construction
- Buna-N O-Rings
- Stainless Steel Hardware
- NEMA TEFC Single and Three Phase Motors Depending on Model
- Stainless Steel Motor Shaft
- Self-Cleaning Impeller
- Discharge Rotates 90° Increments
- Maximum Working Pressure to 150 PSI
- Maximum Temperature 180°F
- Optional Seal Wash Port and Hose is Available on All Models
| Model# | HP | Type | Frame | VAC/60Hz | Full Load Amps (FLA) | Phase | Construction | Seal | Ship Wt | Connect Type | Suc | Dis |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3156-95 | 2 | TEFC | 56J | 230 | 22/11 | 1 | Cast Iron | Buna-N/SS | 78 | NPT | 2" | 1-1/2" |
| 3157-95 | 2 | TEFC | 56J | 230/460 | 6/3 | 3 | Cast Iron | Buna-N/SS | 71 | NPT | 2" | 1-1/2" |
| 3150-95 | 2 | TEFC | 145JM | 230/460 | 6/3 | 3 | Cast Iron | Buna-N/SS | 78 | NPT | 2" | 1-1/2" |
| Model# | Suc* | Dis* | A** | B** | C** | D** | E | F** | G | J** | K | L** | W** | H |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3156-95 | 2" | 1-1/2" | 5.4 | 5.0 | 8.5 | 3.5 | 2.5 | 4.0 | 4.3 | 2.4 | 1.3 | 17.4 | 10.6 | 9.6 |
| 3157-95 | 2" | 1-1/2" | 5.4 | 3.6 | 8.5 | 3.5 | 2.5 | 4.0 | 4.3 | 2.4 | 1.3 | 16.9 | 10.6 | 9.6 |
| 3150-95 | 2" | 1-1/2" | 6.1 | 3.5 | 10.7 | 3.5 | 2.5 | 4.0 | 4.4 | 2.7 | 1.3 | 19.2 | 11.4 | 9.6 |
(*) Standard NPT (female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications