*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 282C-95 & 282K-95 Cast Iron Self-Priming Centrifugal Pumps 1.5 in.
1-1/2 in. NPT Inlet/Outlet, 1 HP, TEFC, 115/230V or 230/460V AC, Single or Three Phase
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 282C-95 | 1-1/2 in. NPT Inlet/Outlet, 1 HP, TEFC, Single Phase, 115/230V AC | $584.66 | |
| 282K-95 | 1-1/2 in. NPT Inlet/Outlet, 1 HP, TEFC, Three Phase, 230/460V AC | $584.66 |
Add Optional Accessories
| Model # | Description | Price | Qty |
|---|---|---|---|
| 276X-302-VS | Silicon Carbide Mechanical Seal - 276X-302-VS | $148.18 | |
| C220-90 | 1-1/2 in. x 20 ft. PVC Suction Hose Assembly | $107.26 | |
| C372-90 | 1-1/2 in. x 50 ft. Discharge Hose | $106.02 |
AMT Pumps - 282C-95 & 282K-95 - Cast Iron Self-Priming Centrifugal Pumps 1.5 in.
AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature self-cleaning clog resistant impeller capable of handling up to 3/8 in. diameter semi-solids. Built in flapper/check valves enable consistent self-priming to 20 ft. Dual volute design reduces radial load on motor. Cast Iron model offer durability, high quality and value that continue to set the standard in the industry.
AMT centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
- Cast iron construction with Buna-N seals, Max temperature 180°F
- Dual volute design
- Handles 3/8 in. diameter semi-solids
- Self cleaning, clog resistant impeller
- Built in flapper/check valve
- Steel base and handle
- Available in TEFC, single or three phase depending on model
- Self-primes to 20 ft.
Stop! Required before ordering:
Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
1 HP TEFC 115/230 Volt - Model 282C-95 |
1 HP TEFC 230/460 Volt - Model 282K-95 |
| Model | Curve | PH | ENC | Voltage @ 60 Hz + | Full Load Amps (FLA) | L** | W** | H |
|---|---|---|---|---|---|---|---|---|
| 282C | B | 1 | TEFC | 115/230 | 12/6 | 17.7 | 9.1 | 9.9 |
| 282K | B | 3 | TEFC | 230/460 | 4/2 | 16.3 | 9.1 | 9.9 |
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
(+) 3-Phase models can also operate on 50 Hz (This will change full load amps and service factor, RPM and priming capabilities).
NOTE: Dimensions are in inches and have a tolerance of ±1/4 in.
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).
