*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 2875-95 & 2878-95 Cast Iron, Self-Priming Centrifugal Pumps
3 in. NPT Inlet/Outlet, 375 GPM, 5 HP, 184JM Frame, 230V or 208-230/460V AC, Single or Three Phase
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 2878-95 | 3 in. NPT Inlet/Outlet, 375 GPM, 5 HP, 184JM Frame, 230V AC, Single Phase | $1,822.80 | |
| 2875-95 | 3 in. NPT Inlet/Outlet, 375 GPM, 5 HP, 184JM Frame, 208-230/460V AC, Three Phase | $1,302.62 |
Add Optional Accessories
| Model # | Description | Price | Qty |
|---|---|---|---|
| 287X-300-V0 | Installed Seal Options 3- 4 in Self-Priming Cast Iron Centrifugal Pump - Viton Seal, O-Ring and Flapper Valve Installed (287 Series) | $148.18 | |
| 287X-300-VS | Installed Seal Options 3- 4 in Self-Priming Cast Iron Centrifugal Pump - Silicon Carbide/Viton Seal, O-Ring and Flapper Valve Installed (287 Series) | $177.32 | |
| 055-363 | 3 in. Suction/Discharge Hose Kit | $294.50 | |
| A200-90 | Mounting Base for 182/184/215 JM Frame Pumps | $319.30 | |
| C356-90 | 3 in. x 20 ft. PVC Suction Hose Assembly | $200.88 | |
| C374-90 | 3 in. X 50 ft. Discharge Hose | $239.94 | |
| C358-90 | 3 in. x 25 ft. Discharge Hose | $154.38 |
AMT Pumps - 2875-95 & 2878-95 - Cast Iron, Self-Priming Centrifugal Pumps
AMT Self-Priming Cast Iron Centrifugal pumps are designed for a broad range of high capacity applications, including dewatering, liquid transfer, circulation, drainage and irrigation. All models are fitted with self-cleaning bronze impellers. Built-in check valves for fast priming are standard on all units. Self-priming to 20 feet. AMT Self-Priming Cast Iron Centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
- Cast Iron construction with Bronze impeller
- Buna-N mechanical seal and O-Ring
- Optional Viton mechanical seal and flapper valve available
- Optional silicon carbide seal available
- 3 in. NPT suction and discharge ports
- Stainless steel shaft sleeve
- Dual volute design reduces radial load on motor
- Fill and drain plugs for easy servicing
- Maximum working pressure 125 PSI
- Maximum temperature 180°F
- Maximum flow 375 GPM
- Maximum head 110 ft.
- Self cleaning, semi open impellers
- 5 HP single or three phase, 184JM Frame, totally enclosed fan cooled (TEFC) motors
- Optional mounting base available on all models
Stop! Required before ordering:
Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
5 HP TEFC 208-230/460 Volt - Model 2875-95 |
5 HP TEFC 230 Volt - Model 2878-95 |
| Model | Curve | PH | Voltage @ 60 Hz + | Full Load Amps | A | B | C | L** | W** | H |
|---|---|---|---|---|---|---|---|---|---|---|
| 2875-95 | B | 3 | 208-230/460 | 14/7 | 3.7 | 16.4 | 5.5 | 26.6 | 12.0 | 11.8 |
| 2878-95 | B | 1 | 230 | 21 | 3.7 | 17.1 | 5.5 | 29.1 | 13.1 | 11.8 |
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
(+) 3-Phase models can also operate on 50 Hz (This will change full load amps and service factor, RPM and priming capabilities).
NOTE: Dimensions are in inches and have a tolerance of ±1/4 in.
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).
