The OPW AVGAS Aircraft line of fueling nozzles complete with a red lever guard that denotes AVGAS. Available in three threaded inlet sizes: 1 in. 1-1/4"in. and 1-1/2"in. Available in two spout outlet sizes: 1 in. and 1-1/2"in. Comes complete with built in swivel, ground wire assembly and dust cap.
Design
Body: Cast Aluminum
Main Stem: Stainless Steel
Stem Seal: Buna-N O-Ring
Disc: Viton
Spout: Aluminum
Working Pressure:110 psi (7.58 bar) Maximum Pressure
Features
Aluminum Body ? lighter weight,
easier to maneuver.
Dual Poppets ? easy-to-open nozzle
against high inlet pressures.
Color-Coded Composite Lever
Guards ? helps distinguish between
AVGAS and Jet A. Easily replaced in
lever guard kit.
Right Angle design - provides
larger lever area for better grip and
easier control.
Vinyl-Coated Lever ? insulates fingers
against cold.
100 Mesh Strainer ? prevents foreign
matter from entering fuel tank; easy
to remove and clean.
Dust Cap ? keeps spout free
from dirt and stops fuel drippage
when connected.
Adjustable Dash Pot ? permits
adjusting the main poppet closure
rate over a wide range of flows
to overcome line shock with
minimum afterflow.
Easily replaced spout ? the spout
is easily threaded into the body.
Replacement spouts are readily
available from OPW.
Built-In swivel eliminates twisting
and kinking of the hose. This swivel
is electroless nickel-plated and has
full-bearing surfaces.
NPT Female Threads at Inlet End
of 295SA ? accepts all 1", 1-1/4"
or 1-1/2" male connections.
Ground Wire Assembly ? included on
all aviation nozzles.
295SA - AVGAS fueling nozzle with 1 in., 1-1/4"in., & 1-1/2"in. threaded inlets available. Red composite lever guard denotes AVGAS. Complete with built-in swivel, ground wire assembly, & dust cap.
This nozzle is for aviation fuel ONLY, and is NOT intended for gasoline or diesel fuels. Use such fuels will void the manufacturer's warranty.
This nozzle is NOT intended to be used with Teflon tape. Use of Teflon tape will void manufacturer's warranty. Instead, we recommend using thread sealant.
Shut Off Adjustment for the OPW 295 Series Nozzle
Ordering Options
Model #
Description
Inlet Thread In.
Spout O.D. In.
lbs.
kg
Stock
295SA-0135
1 in. Inlet / 1 in. Outlet
1
1
4.60
2.10
In Stock
295SA-0136
1-1/4"in. Inlet / 1 in. Outlet
1-1/4"/td>
1
4.50
2.00
In Stock
295SA-0137
1-1/2"in. Inlet / 1 in. Outlet
1-1/2"/td>
1
4.50
2.00
In Stock
295SA-0138
1-1/2"in. Inlet / 1-5/8 in. Outlet
1-1/2"/td>
1-5/8
5.10
2.30
In Stock
295SAC-0156
1-1/4"in. Inlet / 1 in. Outlet With Check Valve
1-1/4"/td>
1
4.50
2.00
Not In Stock*
295SAC-0157
1-1/2"in. Inlet / 1 in. Outlet With Check Valve
1-1/2"/td>
1
4.50
2.00
Not In Stock*
295SAC-0158
1-1/2"in. Inlet / 1-5/8 in. Outlet With Check Valve
1-800-433-8831
My Cart
