AMT Pumps 4861-97 Bronze, Straight Centrifugal Marine Pump

The AMT Model 4860-97 Bronze Centrifugal pump is compact and designed for use in general dewatering, salt water applications including live well tanks, circulation and chemical transfer. Buna-N O-ring casing seal, Buna-N mechanical shaft seal is standard. Model 4860-97 is fitted with a 1/8 HP, 12V DC, 3700 RPM motor. (Self priming model available, see page 39). Driver meets U.S. Coast Guard standards (Title 33, Chapter 1, Part 183, Sub part I) for ignition protection on gasoline powered vessels.

AMT Bronze Centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.

• Bronze construction
• Buna-N mechanical seal and o-ring
• Maximum working pressure 50 PSI
• Maximum Temperature 180° F
• Maximum flow 17 GPM
• Maximum head 12 ft.
• Self-cleaning, semi-open impellers
• Totally enclosed motors
• 12V DC motor

Stop! Required before ordering:

Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart

(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
NOTE: Dimensions are in inches and have a tolerance of ±1/4".
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10% = 207 to 253).

• Bronze Marine Pumps-Spec Sheet