Is your order time-sensitive? Send us an email or call us to see which suppliers are experiencing material shortages or delayed shipping times.

Fully Submersible Effluent Sump Pumps

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

Little Giant 10EN-CIM, 10EN-CIA-RF, 10EN-CIA-SFS Fully Submersible Effluent Sump Pumps

10EN-CIM, 1-1/2 in. FNPT Outlet, 67 GPM, 1/2 HP, 115 or 230 Volts

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price Qty
510801 10EC-CIM 10 ft. Power Cord, 115 Volt, Manual Switch $383.47
Contact Us
Little Giant - 10EN-CIM, 10EN-CIA-RF, 10EN-CIA-SFS - Fully Submersible Effluent Sump Pumps

Little Giant 10EN Series pumps feature 1/2 HP Permanent Split Capacitor (PSC) motors providing lower current draw, energy efficiency, improved performance and cooler-running for durability. Touting a full-load rating of only 8.0 amps the 10EN produces 67 gpm @ 5 ft. of head and a maximum shut off of 30 ft. In addition to a stainless intake plate, the 10EN also features a cast iron cover on the manual and RF (remote float switch) versions.

Applications:

Little Giant 10EN Series Sump/Effluent Pumps are rated for continuous duty use in dewatering and light effluent applications.

Stop! Required before ordering:

Unless specified above, all pumps are for water use only and are not to be used for any other purpose.

If you are selecting a pump that is designed for pumping products other than water, please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart

  • 1/2 HP PSC motor with thermal overload protection
  • Energy saving low amp draw
  • Cooler running motor which extends the life of the pump
  • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance, polypropylene base
  • Stainless steel screws, bolts and handle
  • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces)
  • Upper and lower sintered sleeve bearings
  • 1 1/2 in. FNPT discharge
  • Handles liquid and solid waste materials up to 1/2 in. diameter
  • Available in manual or automatic operation with two switch options;   Intergral snap action float switch - "On" level 7 in. - 10 in., "Off" level 5 in. - 7 in., Piggyback Mechanical float switch - "On" level 12 in. - 14 in., "Off" level 5 in. - 7 in.
  • Two year warranty
  • Fully submersible
  • Cover:   Cast iron (10EN-CIM & 10EN-CIA-RF models)
  • Cover:   Polycarbonate (10EN-CIA-SFS models)
  • Motor Housing:   Epoxy-coated cast iron
  • Impeller Material:   Nylon
  • Volute:   Epoxy-coated cast iron/polypropylene
  • Power Cord:   SJTW
  • Mechanical Shaft Seal:   Nitrile with carbon & ceramic faces
  • Fasteners:   Stainless steel
  • Shaft:   Cold rolled steel
  • Bearings:   Upper and lower sintered sleeve bearings
Model# 511330 511331 511335 511336 511320 511310 511311 511315 511316
Part# 10EN-CIA-SFS 10EN-CIA-SFS 10EN-CIA-SFS 10EN-CIA-SFS 10EN-CIA-RF 10EN-CIM 10EN-CIM 10EN-CIM 10EN-CIM
Listing cCSAus cCSAus cCSAus cCSAus cCSAus cCSAus cCSAus cCSAus cCSAus
HP 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Volts 115 115 230 230 115 115 115 230 230
Solids Size (dia. in.) 1/2 in. 1/2 in. 1/2 in. 1/2 in. 1/2 in. 1/2 in. 1/2 in. 1/2 in. 1/2 in.
Running Amps/Watts 8/850 8/850 4/850 4/850 8/850 8/850 8/50 4/850 4/850
Performance 5 ft. (GPM @ Head) 67 67 67 67 67 67 67 67 67
Performance 10 ft. (GPM @ Head) 61 61 61 61 61 61 61 61 61
Performance 15 ft. (GPM @ Head) 50 50 50 50 50 50 50 50 50
Performance 20 ft. (GPM @ Head) 40 40 40 40 40 40 40 40 40

Shut Off (ft.)

30 30 30 30 30 30 30 30 30
Shut Off (PSI) 13 13 13 13 13 13 13 13 13
Power Cord (ft.) 10 20 10 20 10 10 20 10 20
Switch Type Integral Snap Action Float Piggyback Mechanical Float Manual
Dimensions (HxLxW) (in.) 10.18 x 10.60 x 8.39 9.87 x 8.75 x 8.5
Little Giant Line Curve