Is your order time-sensitive? Send us an email or call us to see which suppliers are experiencing material shortages or delayed shipping times.

The Stopper Overfill Prevention Valves

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

OPW 61fSTOP The Stopper Overfill Prevention Valves

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price Qty
61fSTOP-1000 2 in. Cyl Float $1,389.01
61FSTOP-2000 2 in. Float Arm $1,389.01
61fSTOP-3050 3 in. Cyl Float $1,738.23
Contact Us
OPW - 61fSTOP - The Stopper Overfill Prevention Valves

The OPW 61ƒSTOP Overfill Prevention Valve ("The Stopper") is designed to prevent overfilling of aboveground storage tanks by providing a positive shut-off during a pressurized-fill (pump-on fill) delivery.

Features & Benefits

  • A special crossbar tank-inlet adaptor – is provided with each Stopper to provide for tight-fills and help prohibit open-fills. Mounting hardware, upper drop tube and 14" lower drop tube provided (longer-length drop tubes can be purchased or added).
  • Completely Automatic Operation – No pre-checks to perform, no resets, and no overrides to be broken or abused.
  • Direct or Remote-Fill Compatible – Fuel delivery couplers can be connected directly to the 61ƒSTOP, or steel pipe can be threaded into the top of the valve and piped to a remote location where the couplers are contained in a 211-RMOT Spill Container.
  • Integral Anti-Siphon Valve – Drain vents on the 61ƒSTOP act as an anti-siphon, by introducing air/vapor into the fill line after the valve actuates, to help isolate the tank from a potential siphon due to a broken or leaking remote-fill pipe.
  • 150 psi (10 bar) Pressure Rated* with Low Pressure Drop – To enable quick, safe delivery of fuel into the tank.
  • 25 GPM (95 L/min) Minimum Flow Rate Required.
  • UL and ULC Listed – To satisfy Third Party accreditation requirements of many jurisdictions.
  • CARB Approved VR-401-A; VR-401-B

*OPW does not recommend pumping pressures above 100 psi for Class 1B fuels or remote applications and we make no warranties for products used in conjunction with the 61ƒSTOP.

NOTE: OPW recommends the use of the 61ƒSTOP with clean product only. Debris and other products such as contaminated waste oil may cause improper operation of the valve.

NOTE: The 61ƒSTOP can be used in gravity drop provided the minimum flow rate is maintained. A tight shut off is not achieved in the closed position. However with a minimum tank size of 1,000 gallons, the leak rate will provide a 30 minute warning before the tank is full.

Materials

  • Valve body, adaptor and collar: cast aluminum
  • Poppet: cast aluminum, hard-coated
  • Cam: stainless steel
  • Follower: brass
  • Shaft: CRS zinc-plated
  • Bearing: sintered bronze
  • Float: closed-cell nitrile
  • Nipple: 2 to 3 in. schedule 40 steel pipe
  • Lower nipple: 2 to 3 in. schedule 40 steel pipe with Duragard® coating