SVI International BP-1515A Driveway Signal Bell

Bell rings when car passes over hose. Just plug into any 110-volt outlet, attach hose and arrange hose on driveway. Steel construction for years of reliable service.

Fasten signal at desired location on inside wall, a minimum of 18" above floor. Connect to 110 volt, 3-wire electric outlet. For best results mount signal with pipe stem pointing down. Drill 5/8" hole thru wall or casing to drive. Attach hose to pipe stem on signal - pass hose through wall and place across or around driveway. Plug far end of hose with anchor or bolt. When joining three hose ends, use only a "Y' fitting, not a common I' pipe connection. All connections, splices, tubing, etc., should have 3/8 i.d. To add a second bell in another location or for installations over 150 ft. send for W.R. Bulletin.

Must be installed inside an enclosure or indoors. This unit is NOT weatherproof.

Don't forget to order some hose and an anchor fitting!

WARNING!: Risk of Explosion. This Equipment Has Internal Arcing or Sparking Parts Which Should Not Be Exposed To Flammable Vapor. This Equipment Should Be Located At Least 460 mm (18 Inches) Above The Floor.