-
Manufacturer
M7 Meter Parts
1044 Adjuster Assembly
ADJ O/S HI TEMP
Only $1,205.75
1048 Adjuster Service Kit
with 42600 and Counter Adapter
Only $1,223.95
1050 Adjuster Service Kit
Straight Thru Drive
Only $863.59
1050 Adjuster Service Kit
with 40101 and MTG Plate
Only $1,396.85
1050 Adjuster Service Kit
with 42600 and MTG Plate
Only $945.49
1420 Bearing Plate Assembly
B/P M-7 N/S
Only $845.39
1420 M7 Meter Plate Assembly, Bearing
SV-8
Only $1,078.35
1420 Plate Assembly, Bearing
Bearing Plate SV-10-16
Only $508.69
1420 Plate Assembly, Bearing M7
M-7 Aluminum/Carbon Bored
Only $545.09
1420 Plate Assembly, Bearing M7
SV-15
Only $626.99
2830 M7 Meter COVER, Front Meter Housing
M7,SS, Two PCS Design
Only $1,442.35
2835 Cover, M7 Rear Meter
Stainless Steel
Only $863.59
4020 Gear, Blocking Rotor M7
24 P-60 T-20 PA, DELRN
Only $499.59
6640 Rotor and Gear Kit, Blocking, M7
Class 8: Rotor/Gear/Key/HDWR
Only $972.79
6770 Rotor and Gear Kit, Displacement, M7
Class 8: Rotor/Gear/Key/Hardware for M7 (Tapered)
Only $799.89
7430 Drive Shaft Kit, Adjuster, M5-M7
Class: 8,14
Only $790.79
K010 Packing Gland Kit, DDP
M5, M7 and M15 Aluminum/Buna
Only $444.99
Meter Class | Typical Class Application |
---|---|
Class 1 | Refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze) at rated capacity |
Class 2 | Aviation gasoline, jet fuels when metering is installed downstream of the filter/seperator |
Class 3 | Liquid sugars, corn syrup, corn sweeteners, dextrose, fructose, sucrose maltrose, lactose, corn oil, soy bean oil, cotton seed oil, coconut oil, shortenings, etc. |
Class 4 | Treated waters (deionized, demineralized and potable) Solvents where no red metals are found. |
Class 14 | Crude oils (LACT and NOD), heated liquids, viscous liquids, animal fats, resins, #6 oil, non-abrasive asphalt emulsion. Viton seals standard. |
Class 15 | Oil and water based latex products, polyester resins and adhesives (neutral pH), herbicides and nitrogene solutions (requires Viton and PTFE/FEP seals). |
Class 16 | Methanol, toulene, xylene, naphtha, acetone, MEK, MIBK, alcohol (including ethanol). Use Class 7 for chlorinated solvents. |