Fuel-Gard Monitor Cartridges

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

Facet FG-6 Series Fuel-Gard Monitor Cartridges

6 in. OD, Flow Direction: outside to inside

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price Qty
FG-O-512-7 5 in. x 12 in., 5 in. OD, Flow Direction: outside to inside $146.25
FG-O-609-7 6 in. x 9 in. FG Series Fuel-Gard® Monitor Cartridges, 6 in. OD, Flow Direction: outside to inside $141.05
FG-O-612-7 6 in. x 12 in., 6 in. OD, Flow Direction: outside to inside $178.95
FG-O-633-7 6 in. x 33 in., 6 in. OD, Flow Direction: outside to inside $293.02
FG-O-643-7 6 in. x 43 in., 6 in. OD, Flow Direction: outside to inside Call For Price
Contact Us
Facet - FG-6 Series - Fuel-Gard Monitor Cartridges

The Facet 6 in. (152 mm) nominal outside diameter FG Series Fuel-Gard® monitor cartridges perform three jobs to give you clean, dry fuel. They absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water. They are designed to flow from outside to inside at a rate of 4 gallons (15.14 liters) per inch of length.

Facet FG Series Fuel-Gard® monitor cartridges meet the 4th edition EI 1583 Specifications and Qualification Procedures - Aviation Fuel Monitors With Absorbent Type Elements.

The presence of water or solids in the incoming fuel will be indicated by an increase in the pressure differential or a decrease in the flow rate as the cartridge reaches its maximum capacity for solids, water or a combination of both. When either happens, the cartridge should be replaced.

Each FG Series Fuel-Gard® monitor cartridge is constructed of various water absorbent media, plus fine filtration layers pleated to give you long life. The perforated metal center tube provides for balanced flow and structural strength. The center tube supports both the pleated section and absorbent media when hit with a localized slug of water. The outer shell retains the media during and after shutdown.

Standard Features
  • Tested and qualified to meet 4th edition of EI 1583 Specifications and Qualification Procedures-Aviation Fuel Filter Monitors With Absorbent Type Elements
  • Multi-layered media for increased solids holding, water removal and shutdown protection
  • All metal components are treated against corrosion
  • Structurally withstands a minimum of 174 psid
  • Heavy duty metal center tube and outer shell for extra structural strength
  • Buna-N gaskets-Viton available on request
  • Not adversely affected by exposure to temperatures varying from -65°F to 160°F
ModelNominal LengthOutside Diameter (OD)Inside Diameter (ID)
FG-O-512-212 in. (300 mm.)5-1/2 in. (140 mm.)2 in. (51 mm.)
FG-O-609-29 in. (230 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-612-212 in. (300 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-614-214-1/2 in. (370 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-614SB-214-1/2 in. (370 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-628-228-3/4 in. (730 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-633-233-1/4 in. (840 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-643-243 in. (1050 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)
FG-O-643SB-243 in. (1050 mm.)6 in. (152 mm.)3-1/2 in. (89 mm.)

Overall Rating

|

0 Review(s)


No reviews yet!

Be the first to add a review.

*Reviews are subject to approval