*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Little Giant 14EH-CIM Submersible Effluent Pumps
For Dewatering, Water Transfer and Wastewater Removal, 2 in. FNPT Outlet, 60 GPM, 115 or 208-240 Volts, 1/2 HP, Single Phase
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 514220 | 14EH-CIM 115 Volt, Manual Operation, 20 ft. Power Cord | $1,164.61 |
Little Giant - 14EH-CIM - Submersible Effluent Pumps
The 14EH Series submersible effluent pump from Little Giant is specifically engineered to handle the tough demanding tasks for waste water and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, waste water, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas.
Stop! Required before ordering:
Unless specified above, all pumps are for water use only and are not to be used for any other purpose.
If you are selecting a pump that is designed for pumping products other than water, please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
- Applications: Dewatering, water transfer, effluent and waste water removal
- Manual operation
- Handles liquids and solid waste materials up to 3/4" diameter
- Cast iron pump housing with protective epoxy coating for corrosion and rust resistance
- Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
- Stainless steel screws, bolts and lifting ring
- Mechanical seals (stainless steel spring, nitrile parts, Carbon and ceramic faces) for long life and reliability
- Secondary exclusion seal to help protect mechanical seal
- High speed (3450 RPM) 1/2 HP, ball bearing motor and thermal overload protection for high head operation
- Permanent split capacitor design
- Capacitor and power cord connections isolated from oil filled motor housing for ease of field maintenance
- Dynamically balanced two-vane non-clog impeller with pump-out vanes to enhance pumping performance and efficiency
- Motor Housing: Epoxy coated cast iron
- Impeller Material: Epoxy coated cast iron
- Impeller Type: Non clog
- Volute: Epoxy-coated cast iron
- Power Cord: SJTW-A
- Mechanical Shaft Seal: Nitrile with carbon & ceramic faces
- Fasteners: Stainless steel
- Shaft: Stainless steel
- Bearings: Upper and lower ball bearings
| Model# | HP | Volts | Discharge | Solids Size (dia. in.) | Phase | Hz | RPM | Amps/Watts | Performance (GPM @ Head) | Shut Off | Power Cord | Dimensions | |||
| 30 ft. | 40 ft. | 50 ft. | ft. | PSI | |||||||||||
| 514220 | 1/2 | 115 | 2 in. FNPT | 3/4 in. | 1 | 60 | 3450 | 12.5/1450 | 60 | 40 | 20 | 50 | 21.6 | 20 | 16.2 x 14.1 x 9.9 |
| 514221 | 1/2 | 208-240 | 2 in. FNPT | 3/4 in. | 1 | 60 | 3450 | 5.7/1275 | 60 | 40 | 20 | 50 | 21.6 | 20 | 16.2 x 14.1 x 9.9 |
