*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Gorman-Rupp SM6D1-X30 Series Electric MSHA Submersible Pumps
6 in. ADI Casing, ADI Impeller, 30 HP, 460 or 575V
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | |
---|---|---|---|
SM6D1-X30 460/3 | 6 in. ADI Casing, ADI Impeller, 30 HP, 460V | Call For Price | |
SM6D1-X30 575/3 | 6 in. ADI Casing, ADI Impeller, 30 HP, 575V | Call For Price |
Gorman-Rupp - SM6D1-X30 Series - Electric MSHA Submersible Pumps
Pump Specifications- Diffuser: G-R Hard Iron; Maximum Operating Pressure 95 psi (655 kPa).
- Impeller: G-R Hard Iron. Suction Head: Gray Iron 30.
- Seal Plate: G-R Hard Iron.
- Motor Housing: Aluminum Alloy 356"T6.
- Wear Ring: Copper Alloy 83600.
- Motor Shaft: Stainless Steel 17"4PH.
- Bearings: Upper: Two Synthetic Seals, Single Row Ball Bearing. Lower: Two Shields, Double Row Ball Bearing.
- Discharge Flange: Gray Iron 30.
- Gaskets: Cork with Nitrile Binder (NC710).
- O-Rings: Buna-N.
- Wetted Hardware: Standard Plated Steel and Stainless Steel.
- Strainer: Urethane Coated Steel; 48% Open Area, 0.50" (12,7 mm) Diameter Openings.
- Hoisting Bail: Urethane Coated Steel.
- Standard Equipment: NEMA Type 3R Rainproof Control Box. Provides On/Off, Circuit Breaker and Motor Overload Protection. Staging Adapter.
- Optional Equipment: Liquid Level Control - Turtle Type Pressure Activated Level Switch. Float Activated Level Switch.
Motor/Cable Specifications
- Motor: Air Filled Enclosure with Thermal Overload Protection; 30.0 H.P.; 3450 R.P.M.; Three Phase: 460/575 Volt, 60 Hz, 38.5/30.8 Full Load AMPS, 27.8 kW (Max.)
- Power Cable: 9 Wire; Type SPC; (3) 8 AWG. Power Conductors, (1) 6 AWG. Ground Conductor, (4) 14 AWG. Control Conductors and (1) 8 AWG. Ground Check. Nominal Length 50 Feet (15 m). Standard. (Specify Alternate Length at Time of Order.)
- Recommended Generator Size: 60 kW Across-the-Line Start. 40 kW for Reduced Voltage Starting.
Seal Specifications
- Upper Seal: Type 21, Mechanical. Carbon Rotating Face. Ni-Resist Stationary Face. Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 18"8 Cage and Spring.
- Lower Seal: Type 2, Mechanical. Silicon Carbide Rotating Face and Tungsten Titanium Carbide Stationary Face. Stainless Steel 316 Stationary Seat. Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 18"8 Cage and Spring.