*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Gorman-Rupp SM6E1-X60 Series Electric MSHA Submersible Pumps
6 in. ADI Casing, ADI Impeller, 60 HP, 460 or 575V
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | |
---|---|---|---|
SM6E1-X60 460/3 | 6 in. ADI Casing, ADI Impeller, 60 HP, 460V | Call For Price | |
SM6E1-X60 575/3 | 6 in. ADI Casing, ADI Impeller, 60 HP, 575V | Call For Price |
Gorman-Rupp - SM6E1-X60 Series - Electric MSHA Submersible Pumps
Pump Specifications- Diffuser: G-R Hard Iron. Maximum Operating Pressure 110 psi (758 kPa).* Impeller: G-R Hard Iron.
- Suction Head: Gray Iron 30.
- Seal Plate: G-R Hard Iron.
- Motor Housing: Aluminum Alloy 356"T6.
- Wear Ring: Copper Alloy C83600.
- Motor Shaft: Stainless Steel Type 17-4 PH.
- Bearings: Upper,Two Synthetic Seals, Single Row Ball Bearing. Lower, Two Shields, Double Row Ball Bearing.
- Discharge Flange: Gray Iron 30.
- Gaskets: Cork with Nitrile Binder (NC710).
- O-Rings: Buna-N.
- Wetted Hardware: Standard Plated Steel and Stainless Steel.
- Strainer: Urethane Coated Steel; 48% Open Area, 0.50" (12,7 mm ) Diameter Openings.
- Base Plate: Aluminum Alloy No. 356"T6.
- Hoisting Bail: Urethane Coated Steel.
- Standard Equipment: NEMA Type 10 Explosion Proof Control Box Provides On/Off, Circuit Breaker and Motor Overload Protection. MSHA Certification No. X/P 3026"1. Staging Adaptor.
- Optional Equipment MSHA°Certified Automatic Control Box, Single Ball Type Float Switch.
Motor/Cable Specifications
- Motor: Air Filled Enclosure w/Thermal Overload Protection; 60 H.P.; 3450 R.P.M. Three Phase: 460/575 Volt, 60 Hz, 66/52.8 Full Load AMPS, 48 kW (Max.) MSHA Certification No. X/P 3689 0.
- Power Cable: 9 Wire; Type SPC; (3) 6 AWG. Power Conductors, (1) 6 AWG. Ground Conductor, (4) 14 AWG. Control Conductors and (1) 8 AWG. Ground Check. Nominal Length 50 Feet (15 m) Standard. (Specify Alternate Length at Time of Order.)
Seal Specifications
- Upper Seal: Type 21, Mechanical. Carbon Rotating Face. Ni-Resist Stationary Face. Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 18"8 Cage and Spring.
- Lower Seal: Type 2, Mechanical. Silicon Carbide Rotating Face and Tungsten Titanium Carbide Stationary Face. Stainless Steel 316, Stationary Seat. Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 18"8 Cage and Spring.