*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 379C-95 Sprinkler/Booster Pump
1-1/2 in. NPT Inlet/Outlet, 2 HP, Single Phase, TEFC Enclosure
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 379C-95 | 1-1/2 in. NPT Inlet/Outlet, 2 HP, Single Phase, TEFC Enclosure | $655.96 |
Add Optional Accessories
| Model # | Description | Price | Qty |
|---|---|---|---|
| 379X-300-VS | Installed Viton Sprinkler/ Booster Pump - Viton Flapper Valve, Sil/Car Viton Mechanical Seal and O-Ring | $148.18 |
AMT 379C-95 Sprinkler/Booster Pump
AMT Sprinkler/Booster pumps feature 300 Series Investment cast stainless steel closed impellers for high efficiency and resistance against erosion caused by abrasive particles.
All models self-prime to 20 feet.
Features dual volute design to reduce radial load on motor and a built-in check valve to ensure fast priming after initial liquid is added to the pump.
Cast iron construction provides durability and low maintenance.
Easy cleanout design includes replaceable dual volute/diffuser and casing o-ring for servicing.
Type 21 mechanical seals handle maximum working pressure to 150 PSI.
Stop! Required before ordering:
Unless specified above, all pumps are for water use only and are not to be used for any other purpose.
If you are selecting a pump that is designed for pumping products other than water, please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
| Model | Phase* | Enclosure | VAC/60 Hz | Full Load Amps | Max GPM | Total Head | QSP |
|---|---|---|---|---|---|---|---|
| 3793-95 | 1 | ODP | 115/230 | 28/14 | 95 | 130 ft. | QSP |
| 379C-95 | 1 | TEFC | 230 | 22/11 | 78 | 120 ft. | |
| 379E-93 | 3 | TEFC | 230/460 | 6/3 | 78 | 120 ft. | QSP |
(*)Single phase models feature automatic thermal overload protection.
QSP = 24 hour shipment
- Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impeller
- Buna-N Mechanical Seal and O-ring
- Features Removable/Replaceable Dual Volute/Diffuser
- 1/16 in. Maximum Solids
- Single Stage Pumps
- Self-priming to 20 Feet
- Maximum Working Pressure to 150 PSI
- Maximum Temperature 180°F
- 1-½ in. NPT Inlet/Outlet
- 2 HP
Standard Features
| Model | Curve | A | B | C | D | E | F | G | J | K | L** | W** | H |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3793-95 | D | 2.2 | 2.1 | 2.9 | 4.4 | 4.7 | 3.1 | 6.2 | 0.5 | 0.7 | 18.8 | 8.0 | 9.1 |
| 379C-95 | C | 2.2 | 2.1 | 2.9 | 4.4 | 4.7 | 3.1 | 6.2 | 0.5 | 0.7 | 19.8 | 9.3 | 9.1 |
| 379E-95 | C | 2.2 | 2.1 | 2.9 | 4.4 | 4.7 | 3.1 | 6.2 | 0.5 | 0.7 | 19.3 | 9.3 | 9.1 |
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
NOTE: Dimensions are in inches and have a tolerance of ±1/4 in.
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10%= 207 to 253).