*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Morrison Brothers 710F Series Solenoid Valve
.75 in. - 3 in., Cast Bronze, Normally Closed
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | Qty |
---|---|---|---|
710F--0075 1V | .75 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,076.15 | |
710F12D0200 1V | with 12 Volt DC Coil, Flanged, 2 in. | $1,781.08 | |
710F2080200 1V | with 208 Volt AC Coil, Flanged, 2 in. | $1,781.08 | |
710F2080300 1V | with 208 Volt AC Coil, Flanged, 3 in. | $3,776.01 | |
710F2400200 1V | with 240 Volt AC Coil, Flanged, 2 in. | $1,781.08 | |
710F2400300 1V | with 240 Volt AC Coil, Flanged, 3 in. | $3,776.01 | |
710F24D0200 1V | with 24 Volt DC Coil, Flanged, 2 in. | $1,781.08 | |
710F48D0200 1V | with 48 Volt DC Coil, Flanged, 2 in. | $1,781.08 | |
710F--0100 1V | 1 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,392.68 | |
710F--0150 1V | 1.5 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,514.98 | |
710F--0200 1V | 2 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,781.08 | |
710F--0300 1V | 3 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $3,776.01 | |
710FMO0200 1V | 2 in., Bronze (FKM), Normally Closed, 120V AC Coil, Flanged w/ Mechanical Overide | $1,875.04 |
Morrison Bros. Co. 710F Series Solenoid Valve - Normally Closed
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. They are generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.
Features:- Operates at 120 volts AC (24, 208, 220, 240, & 480 volts AC, and 12, 24, and 48 volts DC also available)
- Minimum operating temperature is -40°F
- Includes a continuous duty Class H standard coil. Other options are available
- Must be mounted in a horizontal pipeline with solenoid vertical and upright
- No differential pressure is required to open the valve
- Connects to a conduit. 18" lead wire provided
- Enclosure is watertight and rated for hazardous locations on aboveground fuel storage tanks- NEMA 3, 4X, 7 and 9; groups C and D
- Available in Viton or Teflon seals (3" only in Viton)
- Has a built-in expansion relief
- Flanged connections ANSI 150 RF
- Maximum viscosity rating of 60 Centistokes
- Manual overide feature available (Fig. 710FMO or 710FSM)
- Body: Cast bronze
- Seals: FKM
- CSA listed (File No. 108921, Model Z1314); Class I, Groups C and D; Class II, Groups E, F, and G. Class III, T3C
NOTE: It is strongly recommended that a line strainer with 100 mesh be installed at the inlet of this valve. Failure to do so may cause the valve to malfunction and void the warranty.
NOTE: Product can only be pumped in the direction of the flow arrow. Not designed for use as overfill prevention or process control valve.