*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Pneumercator 900496 Series Analog Output Card, Limit ONE (1) Per System
6 or 12 Channel, For TMS4000, TMS3000, TMS4000W
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 900496-1 | 6 Channel, For TMS4000, TMS3000, TMS4000W | $1,087.13 | |
| 900496-2 | 12 Channel, For TMS4000, TMS3000, TMS4000W | $1,618.50 |
Pneumercator - 900496 Series - Analog Output Card, Limit ONE (1) Per System
The TMS series analog output card is a plug-in option for the TMS Series Tank Management Systems which provides either six (6) or twelve (12) channels of non-isolated current loop output data, globally selectable for 0-20 mA, 0-24 mA or 4-20 mA ranges. These outputs can be connected to most programmable logic controllers, building management systems, and similar analog input monitoring devices to provide continuous tank data without the need for communications protocol support. Each current loop channel is field programmable by tank number and data type, including gross volume, net volume, product level, water level and product temperature. If desired, voltage outputs, for example 0-5 V, 1-5 V or 0-10 V can easily be configured using an external resistor. The TMS series analog output board requires no calibration and provides full-scale accuracy better than +/- 0.05% of full scale.Specifications
- Output Capacity: 6 or 12 channels
- DC Output Modes: Non-isolated 4-20 mA, 0-20 mA, 0-24 mA, 0-5 V, 1-5 V or 0-10 V
- Resolution: 15-bit
- Accuracy: Better than +/- 0.05% of full scale
- Operating Temperature: -40 °F to +175 °F (-40 °C to +80 °C)
- Output Data: Each output programmable by tank channel and output data, including Gross or Net Product Volume, Product or Water Level, or Product Temperature
- Maximum Wire Gauge: 20 AWG solid conductor
- Loop fault detection
- Uses one I/O Expansion Slot
- Compatible with TMS2000, TMS2000W, TMS2000A1, TMS2000A2, TMS3000, TMS4000, and TMS4000W
Installation
The Analog Output Card uses the TMS2000/TMS2000W/TMS2000A1/TMS2000A2 non-hazardous I/O Expansion position or the TMS3000/TMS4000/TMS4000W non-hazardous I/O Expansion slot 2. Refer to Bulletin 139 for detailed information.