*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Morrison Brothers 710FSS Series Solenoid Valve
1.5 in. - 3 in., Stainless Steel, Normally Closed
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | Qty |
---|---|---|---|
710FSS2150 1V | 1.5 in., Stainless Steel (PTFE), Normally Closed, 120 AC Coil, Flanged | $2,653.78 | |
710FSS2200 1V | 2 in., Stainless Steel (PTFE), Normally Closed, 120 AC Coil, Flanged | $3,259.65 | |
710FSS0300 1V | 3 in., Stainless Steel (Aluminum Piston, PTFE Seal), Normally Closed, 120 AC Coil, Flanged | $5,050.77 | |
710FSM2200 1V | 2 in., Stainless Steel (PTFE), Normally Closed, 120 AC Coil, Flanged w/ Mechanical Overide | $3,353.62 |
Morrison Bros. Co. 710FSS Series Solenoid Valve - Normally Closed
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. They are generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.
Features:- Operates at 120 volts AC (24, 208, 220, 240, & 480 volts AC, and 12, 24, and 48 volts DC also available)
- Minimum operating temperature is -40°F
- Includes a continuous duty Class H standard coil. Other options are available
- Must be mounted in a horizontal pipeline with solenoid vertical and upright
- No differential pressure is required to open the valve
- Connects to a conduit. 18" lead wire provided
- Enclosure is watertight and rated for hazardous locations on aboveground fuel storage tanks- NEMA 3, 4X, 7 and 9; groups C and D
- Available in Viton or Teflon seals (3" only in Viton)
- Has a built-in expansion relief
- Flanged connections ANSI 150 RF
- Maximum viscosity rating of 60 Centistokes
- Manual overide feature available (Fig. 710FMO or 710FSM)
- Body: 304 Stainless Steel
- Seals: PTFE
- CSA listed (File No. 108921, Model Z1314); Class I, Groups C and D; Class II, Groups E, F, and G. Class III, T3C
NOTE: It is strongly recommended that a line strainer with 100 mesh be installed at the inlet of this valve. Failure to do so may cause the valve to malfunction and void the warranty.
NOTE: Product can only be pumped in the direction of the flow arrow. Not designed for use as overfill prevention or process control valve.