Morrison Brothers - 710F12D0200 1V - Solenoid Valve (FKM)

Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. Generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.

• Normally closed, hung piston design
• Install in a horizontal pipeline in the upright vertical position
• Minimum operating temperature is -40°F
• Zero pressure differential
• Integral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flow
• Continuous duty Class H standard coil operates at 120 volts
• Enclosure is watertight and rated for hazardous locations NEMA 3, 4X, 7 and 9; groups C and D
• Several optional coil voltages available
• Flanged body connections
• Recommended for use with liquids having a maximum viscosity of 60 centistokes
• A strainer with a 100 mesh screen is recommended at the valve inlet

Construction Details:

• Body: Cast bronze
• Seals: FKM, PTFE
• Solenoid housed in an integral, watertight, explosion-proof shell