Straight Centrifugal Marine Pump, Bronze
One Year Manufacturer Warranty

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

AMT Pumps 3670-97 Straight Centrifugal Marine Pump, Bronze

3/4 in. Inlet/Outlet, 1/8 HP, 115V AC

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price Qty
3670-97 3/4 in. Inlet/Outlet, 1/8 HP, 115V AC $337.94
Contact Us
AMT Pumps - 3670-97 - Straight Centrifugal Marine Pump, Bronze
1 Year Warranty

The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and features provisions for the installation of a seal wash, front drain plug and pull-from-rear design. The unit features Buna-N O-ring casing seal and Buna- N mechanical shaft seal. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a Stainless Steel shaft. On/off switch and line cord are standard.

AMT Bronze Centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.

  • Bronze construction
  • Buna-N mechanical seal and o-ring
  • Maximum working pressure 50 PSI
  • Maximum Temperature 180° F
  • Maximum flow 17 GPM
  • Maximum head 12 ft.
  • Self-cleaning, semi-open impellers
  • Totally enclosed motors
  • 115V AC motor

Stop! Required before ordering:

Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart

Model # Curve PH RPM Voltage @ 60 Hz Full Load Amps Suc* Dis* L** W H
3670-94 A 1 1750 115 11 3/4 3/4 10.1 8.0 5.6

(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
NOTE: Dimensions are in inches and have a tolerance of ±1/4".
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10% = 207 to 253).

Overall Rating

|

0 Review(s)


No reviews yet!

Be the first to add a review.

*Reviews are subject to approval