*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 2P5XP & 2S5XP High Pressure Pumps
2 in. Inlet/Outlet, General Purpose, High Pressure or Trash, Alum./Cast Iron or All Cast Iron, 3/4 in. Keyed Shaft, Ped. Water Pumps
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | Qty |
---|---|---|---|
2S5XP | 2 in. Inlet/Outlet, General Purpose, High Pressure water Pump, Aluminum / Cast Iron, 3/4 in. Keyed Shaft, Ped. Pumps | $602.64 | |
2P5XP | 2 in. Inlet/Outlet, General Purpose, Aluminum / Cast Iron, 3/4 in. Keyed Shaft, Water Pump | $602.64 |
Add Optional Accessories
Model # | Description | Price | Qty |
---|---|---|---|
055-362 | 2 in. Suction/Discharge Hose Kit | $168.02 | |
C221-90 | 2 in. x 20 ft. PVC Suction Hose Assembly | $112.22 | |
C373-90 | 2 in. x 50 ft. Discharge Hose | $93.00 |
AMT Pumps - 2P5XP & 2S5XP - High Pressure Pumps
Pedestal drive units for flex-coupling to an electric motor are available in general purpose, high pressure and trash versions. All models are standard with threaded impeller.
- Cast Iron or Aluminum Construction
- General Purpose-Type G Only
- Cast Iron Impeller and Volute for Long Life
- EPDM/EPR Seals and O-Rings
- High Pressure-Type P Only
- Aluminum Impeller with Cast Iron Volute for High Efficiency
- EPDM/EPR Seals and O-Rings
- Trash-Type S Only
- Cast Iron Impeller & Volute for Resistance to Wear and Abrasion
- Silicon/Carbide/Viton® Mechanical Seal and EPDM/EPR O-Rings
- Stainless Steel Internal Screws and Pins for Easy Servicing
- Large Pump Casing for Faster Priming
- Built-in EPDM/EPR Check Valve for Fast Priming
- Horizontal Discharge-No Need to Buy Elbow
- Threaded Male Connections-No Need to Buy Nipples
- Stainless Steel Shaft Sleeve
- Strainer Supplied with Each Pump-to Prevent Clogging
Model
|
HP Class∇
|
SUC*
|
DIS*
|
L**
|
W**
|
H
|
2P5XP / 2S5XP
|
5 HP min.
|
2 in. M
|
2 in. M
|
18.3[46.4]
|
12.5[31.7]
|
16.4[41.6]
|
∇HP Class represents market category and is not intended to define actual horsepower
* Standard NPT (Male) Pipe Thread
** This dimension may vary due to engine manufacturer's specifications.
NOTE: Dimensions are in inches [centimeters] and have a tolerance of ± 1/8 in.
Model
|
Drive Type
|
Check Valve
|
O-Ring
|
Const.
|
Seal Type & Elastomer/Faces
|
2S5XP
|
Trash
|
EPDM/EPR
|
EPDM/EPR
|
Alum/Cast Iron
|
Viton® /SIC/SIC
|
2P5XP
|
High Pres.
|
EPDM/EPR
|
EPDM/EPR
|
Alum/Cast Iron
|
EPDM/EPR/CAR/CER
|
No reviews yet!
Be the first to add a review.
*Reviews are subject to approval