*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 3670-97 Straight Centrifugal Marine Pump, Bronze
3/4 in. Inlet/Outlet, 1/8 HP, 115V AC
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | Qty |
---|---|---|---|
3670-97 | 3/4 in. Inlet/Outlet, 1/8 HP, 115V AC | $337.94 |
AMT Pumps - 3670-97 - Straight Centrifugal Marine Pump, Bronze
The AMT Model 3670-94 Naval Bronze Straight Centrifugal pump is designed for low pressure salt water wash down and recirculating applications. The pump has been sized for salt water (1.03 specific gravity) and features provisions for the installation of a seal wash, front drain plug and pull-from-rear design. The unit features Buna-N O-ring casing seal and Buna- N mechanical shaft seal. The unit is driven by a 1/8 HP capacitor start induction motor (TEFC) with ball bearings and a Stainless Steel shaft. On/off switch and line cord are standard.
AMT Bronze Centrifugal pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
- Bronze construction
- Buna-N mechanical seal and o-ring
- Maximum working pressure 50 PSI
- Maximum Temperature 180° F
- Maximum flow 17 GPM
- Maximum head 12 ft.
- Self-cleaning, semi-open impellers
- Totally enclosed motors
- 115V AC motor
Stop! Required before ordering:
Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
Model # | Curve | PH | RPM | Voltage @ 60 Hz | Full Load Amps | Suc* | Dis* | L** | W | H |
---|---|---|---|---|---|---|---|---|---|---|
3670-94 | A | 1 | 1750 | 115 | 11 | 3/4 | 3/4 | 10.1 | 8.0 | 5.6 |
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
NOTE: Dimensions are in inches and have a tolerance of ±1/4".
NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ±10% = 207 to 253).
No reviews yet!
Be the first to add a review.
*Reviews are subject to approval