*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Facet FG-2 Series Fuel-Gard Monitor Cartridges
Carton of 20; Monitor Cartridges - 2in., Flow Direction: Inside to Outside
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price |
---|---|---|
FG-205-7 | Carton of 20 Monitor Cartridges - 2in. x 5in. | Call For Price |
FG-210-7 | Carton of 20 Monitor Cartridges - 2in. x 10in. | Call For Price |
FG-215-7 | Carton of 20 Monitor Cartridges - 2in. x 15in. | Call For Price |
FG-220-7 | Carton of 20 Monitor Cartridges - 2in. x 20in. | Call For Price |
FG-225-7 | Carton of 20 Monitor Cartridges - 2in. x 25in. | Call For Price |
FG-230-7 | Carton of 20 Monitor Cartridges - 2in. x 30in. | Call For Price |
Facet - FG-2 Series - Fuel-Gard Monitor Cartridges
The Facet 2 in. (51 mm.) nominal outside diameter FG Series Fuel-Gard® monitor cartridges perform three jobs, they absorb free and emulsified water, remove ultra-fine solids and shut down system flow when hit with a localized slug of water, giving you clean, dry fuel. The FG Series Fuel-Gard® monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.
Fuel-Gard® monitor cartridges meet the 6th edition of EI 1583 Specifications and Qualification Procedures - Aviation Fuel Filter Monitors With Absorbent Type Elements.
The presence of water or solids in the incoming fuel will be indicated by an increase in the pressure differential or a decrease in the flow rate as the cartridges reach their maximum capacity for solids, water or a combination of both. When either happens, the cartridges should be replaced.
Each FG Series Fuel-Gard® monitor cartridge is constructed of various water absorbent media, plus fine filtration layers wrapped around a molded center tube for balanced flow and structural strength, all encased in a protective outer sock material. The end cap material is of injection molded, glass-filled nylon which provides superior strength and ease of maintenance. This material gives excellent support for the o-ring on the mounting/adaptor end.
Standard Features
- Tested and qualified to meet the 6th Edition of EI 1583 Specifications and Qualification Procedures-Aviation Fuel Filter Monitors With Absorbent Type Elements
- Multi-layered media for increased solids holding, water removal and shutdown protection
- New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
- Structurally withstands a minimum of 174 psid
- Not adversely affected by exposure to temperatures varying from -65°F to 160°F
Model | Nominal Length | Outside Diameter (OD) | Inside Diameter (ID) |
---|---|---|---|
FG-205-6 | 5-7/8 in. (150 mm.) | 1-3/4 in. (45 mm.) | 7/8 in. (23 mm.) |
FG-210-6 | 10-7/8 in. (227 mm.) | 1-3/4 in. (45 mm.) | 7/8 in. (23 mm.) |
FG-215-6 | 15-7/8 in. (404 mm.) | 1-3/4 in. (45 mm.) | 7/8 in. (23 mm.) |
FG-220-6 | 20-7/8 in. (531 mm.) | 1-3/4 in. (45 mm.) | 7/8 in. (23 mm.) |
FG-225-6 | 25-7/8 in. (658 mm.) | 1-3/4 in. (45 mm.) | 7/8 in. (23 mm.) |
FG-230-6 | 30-7/8 in. (785 mm.) | 1-3/4 in. (45 mm.) | 7/8 in. (23 mm.) |