-
Manufacturer
M15 Meter Parts
1044 Adjuster Assembly
ADJ O/S HI TEMP
Only $1,205.75
1050 Adjuster Service Kit
Straight Thru Drive
Only $863.59
1050 Adjuster Service Kit
with 40101 and MTG Plate
Only $1,396.85
1050 Adjuster Service Kit
with 42600 and MTG Plate
Only $945.49
1440 M15 Meter Plate Assembly, Bearing
AHA/TF Class 15
Only $1,014.65
1440 Plate Assembly, Bearing
Plate-Bearing M15 Bored NR
Only $899.99
1440 Plate, Bearing
SV-1-2-3-14
Only $663.39
2840 Cover, Counter End
FRT M15, No Paint Unless Noted
Only $1,105.65
2840 Cover, Front; M15 Meter
Aluminum, 350 PSI VRSN
Only $1,051.05
2845 Cover, Rear
M15 Aluminum, No Paint Unless Noted
Only $481.39
6660 Rotor and Gear Kit, Blocking, M15
Class 15: Rotor/Gear/Key/Hardware
Only $435.89
6660 Rotor and Gear Kit, Blocking, M15
Class 4: Rotor/Gear/Key/Hardware
Only $490.49
7430 Drive Shaft Kit, Adjuster, M15
Class: 14
Only $763.49
K010 Packing Gland Kit, DDP
M5, M7 and M15 Aluminum/Buna
Only $444.99
Meter Class | Typical Class Application |
---|---|
Class 1 | Refined petroleum products, leaded and unleaded gasoline, fuel oils, diesel fuel, kerosene, ethylene glycol (antifreeze) at rated capacity |
Class 2 | Aviation gasoline, jet fuels when metering is installed downstream of the filter/seperator |
Class 3 | Liquid sugars, corn syrup, corn sweeteners, dextrose, fructose, sucrose maltrose, lactose, corn oil, soy bean oil, cotton seed oil, coconut oil, shortenings, etc. |
Class 4 | Treated waters (deionized, demineralized and potable) Solvents where no red metals are found. |
Class 14 | Crude oils (LACT and NOD), heated liquids, viscous liquids, animal fats, resins, #6 oil, non-abrasive asphalt emulsion. Viton seals standard. |
Class 15 | Oil and water based latex products, polyester resins and adhesives (neutral pH), herbicides and nitrogene solutions (requires Viton and PTFE/FEP seals). |
Class 16 | Methanol, toulene, xylene, naphtha, acetone, MEK, MIBK, alcohol (including ethanol). Use Class 7 for chlorinated solvents. |