|
*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 394G-95 & 394H-95
Self-Priming Electric Trash Pumps
3 in. NPT Inlet/Outlet Sewage/Trash Water Pump, 7-1/2 HP, 230V or 230/460V AC, Single or Three Phase, 215JM or 184JM Frame, 31 or 22/11 FLA
Ships from Manufacturer
AMT 394H-95 & 394G-95 Self-Priming Electric Trash Pumps 
AMT Cast Iron Sewage/Trash pumps are designed for handling solid laden liquids and slurries. Cast iron construction with 2 vane Stainless Steel self-cleaning impellers, Silicon Carbide mechanical seals for abrasion resistance. Built-in check valve allows pumps to re-prime automatically in an open system, without need of a foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, meat packing, breweries, pulp, wood chips, process water, sludge and slime, waste water, white water and other applications. AMT Sewage/Trash pumps will easily handle liquids containing sewage, stone, sticks, mud, and other solids. These pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials. - Cast iron construction for abrasive resistance and durability
- Self-cleaning stainless steel impellers resist clogging and wear
- Pull-from rear design permits clean out and repair without removing piping
- Silicon carbide/Viton® mechanical seal
- Built in Buna-N check valve
- Buna-N o-ring casing seal reusable after cleanout maintenance
- Replaceable cast iron volute/wearplate designed for solids-handling
- Motor includes stainless steel shaft or stainless steel shaft sleeve
- Available with 3 to 15HP totally enclosed fan cooled (TEFC) electric motors
- Single and three phase, 3450 RPM motors
- Optional mounting base available for 184/215 JM frames
Stop! Required before ordering: Unless specified above, all pumps are for water use only and are not to be used for any other purpose.
If you are selecting a pump that is designed for pumping products other than water, please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
| Model | Curve | A** | B | C** | D | E | F | G | J** | K | L** | W** | H |
|---|
| 394H-95 | C | 4.2 | 3.5 | 5.5 | 6.0 | 6.5 | 5.0 | 9.3 | 16.4 | 3.7 | 31.1 | 15.5 | 12.5 | | 394G-95 | C | 3.7 | 3.5 | 5.5 | 6.0 | 6.5 | 5.0 | 9.3 | 15.7 | 3.7 | 26.6 | 13.5 | 12.5 |
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor manufacturer's specifications.
NOTE: Dimensions are in inches and have a tolerance of ±1/4".  
AMT model 394A-95 has been replaced with 394G-95 and model 394B-95 has been replaced with 394H-95.
The performance for these new models will remain the same as well as the 3 inch NPT Ports. Both models will still provide 7 1/2 Horsepower, 3 Phase with TEFC (Totally Enclosed Fan Cooled) motor enclosure. The cast iron casing has been updated and redesigned with new tooling to fall in line with AMT's modular design. This enhancement will better allow for greater part interchangeability with other models in this series.
|
|
1-800-433-8831
My Cart
