*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Facet FG-225-7 Fuel-Gard® Monitor Cartridges
Carton of 20 Monitor Cartridges - 2in. x 25in.
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price |
---|---|---|
FG-225-7 | Carton of 20 Monitor Cartridges - 2in. x 25in. | Call For Price |
Facet - FC-225-7
Carton of 20: 2 in. x 25 in. FG Series Fuel-Gard Monitor Cartridges 2 in. OD Flow Direction: outside to inside
The Facet 2 in. (51 mm.) nominal outside diameter FG
Series Fuel-Gard® monitor cartridges perform three
jobs they absorb free and emulsified water, remove
ultra-fine solids and shut down system flow when hit
with a localized slug of water, giving you clean, dry
fuel. The FG Series Fuel-Gard® monitor cartridges are
designed to flow from the outside to inside at a rate of
1 gallon (3.79 liters) per inch of length.
Fuel-Gard® monitor cartridges meet the 7th
edition of EI 1583 Specifications and Qualification
Procedures Aviation Fuel Filter Monitors With
Absorbent Type Elements.
The presence of water or solids in the incoming
fuel will be indicated by an increase in the pressure
differential or a decrease in the flow rate as the
cartridges reach their maximum capacity for solids,
water or a combination of both. When either
happens, the cartridges should be replaced.
Each FG Series Fuel-Gard® monitor cartridge is
constructed of various water absorbent media,
plus fine filtration layers wrapped around a molded
center tube for balanced flow and structural
strength all encased in a protective outer sock
material. The end cap material is of injection molded,
glass-filled nylon which provides superior strength and
ease of maintenance. This material gives excellent
support for the o-ring on the mounting/adaptor end.
- Tested and qualified to meet the 7th Edition of EI 1583 Specifications and Qualification Procedures-Aviation Fuel Filter Monitors With Absorbent Type Elements
- Multi-layered media for increased solids holding, water removal and shutdown protection
- New conductive end caps with anti-static properties which greatly reduce the possibility of static discharge during the fueling process
- Structurally withstands a minimum of 174 psid
- Not adversely affected by exposure to temperatures varying from -65°F to 160°F
Model | Nominal Length | Outside Diameter (OD) | Inside Diameter (ID) |
---|---|---|---|
FG-225-7 | 25-7/8 in. (658 mm.) | 1-3/4"in. (45 mm.) | 7/8 in. (23 mm.) |