*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Facet FG-O-612-7 FG Series Fuel-Gard® Monitor Cartridges
6 in. x 12 in., 6 in. OD, Flow Direction: outside to inside
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| FG-O-612-7 | 6 in. x 12 in., 6 in. OD, Flow Direction: outside to inside | $178.95 |
Facet - FG-O-612-7 - FG Series Fuel-Gard® Monitor Cartridges
The Facet 6 in. (152 mm) nominal outside diameter
FG Series Fuel-Gard® monitor cartridges perform
three jobs to give you clean, dry fuel. They absorb
free and emulsified water, remove ultra-fine solids
and shut down system flow when hit with a
localized slug of water. They are designed to flow
from outside to inside at a rate of 4 gallons (15.14
liters) per inch of length.
Facet FG Series Fuel-Gard® monitor cartridges
meet the 7th edition EI 1583 Specifications and
Qualification Procedures Aviation Fuel Monitors
With Absorbent Type Elements.
The presence of water or solids in the incoming fuel
will be indicated by an increase in the pressure
differential or a decrease in the flow rate as the
cartridge reaches its maximum capacity for solids,
water or a combination of both. When either
happens, the cartridge should be replaced.
Each FG Series Fuel-Gard® monitor cartridge is
constructed of various water absorbent media,
plus fine filtration layers pleated to give you long
life. The perforated metal center tube provides
for balanced flow and structural strength. The
center tube supports both the pleated section and
absorbent media when hit with a localized slug of
water. The outer shell retains the media during and
after shutdown.
- Tested and qualified to meet 7th edition of EI 1583 Specifications and Qualification Procedures-Aviation Fuel Filter Monitors With Absorbent Type Elements
- Multi-layered media for increased solids holding, water removal and shutdown protection
- All metal components are treated against corrosion
- Structurally withstands a minimum of 174 psid
- Heavy duty metal center tube and outer shell for extra structural strength
- Buna-N gaskets-Viton available on request
- Not adversely affected by exposure to temperatures varying from -65°F to 160°F
| Model | Nominal Length | Outside Diameter (OD) | Inside Diameter (ID) |
|---|---|---|---|
| FG-O-612-7 | 12 in. (300 mm.) | 6 in. (152 mm.) | 3-1/2"in. (89 mm.) |
No reviews yet!
Be the first to add a review.
*Reviews are subject to approval