Is your order time-sensitive? Send us an email or call us to see which suppliers are experiencing material shortages or delayed shipping times.

Underground Grease Interceptor
Underground Grease Interceptor
Underground Grease Interceptor
Underground Grease Interceptor

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

Containment Solutions UGWT-SW-GI-2000-6 Underground Grease Interceptor

2,000 Gal. 6 Ft. Diameter, Single-Wall, Fiberglass

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price
UGWT-SW-GI-2000-6 2,000 Gal. 6 Ft. Diameter, Single-Wall, Fiberglass Call For Price
Contact Us
Containment Solutions - UGWT-SW-GI-2000-6 - Underground Grease Interceptor

The above tank model is preset for a typical installation. Additional options and accessories are available. Feel free to call us at 1-800-433-8831 if you have any questions, or need an alternate setup.

Grease interceptors (also referred to as grease traps for smaller applications) are temporary storage /disposal tanks for wastewater in grease producing environments. Contaminants in this particular type of wastewater are made up of fats, oils, and grease ( FOG ). As FOG materials cool they congeal in sewer lines causing massive blockages and costly back-ups.

A grease interceptor is designed to store wastewater long enough for the immiscible materials to naturally separate and float to the top of the water level where the FOG can be collected and disposed of properly. Typically this wastewater flows directly from a sink drain or wash area. Due to the unpredictable nature of contaminants, the storage vessel should be rust proof and non-corrosive which makes fiberglass an ideal structural material.

Any establishment that introduces grease, oil or any other FOG material into the sewer system in quantities large enough to cause line blockages is required to install a grease trap or interceptor.

Flowtite tanks are engineered to meet and exceed current requirements and standards. We offer IAPMO approved grease interceptors in various sizes up to 12 ft. diameter including fiberglass baffles and other accessories.

Dimensions
Tank Length:
- 11 ft. 2 in.
Tank Weight:
- 1,050 lbs.
    Typical Applications
  • Restaurants
  • Hotels
  • Hospitals
  • Schools
  • Grocery Stores/Chains
  • Food Service Kitchens
  • Industrial Complexes

This product requires a crane, (or when applicable a forklift) for offloading and placement.

This is also a product that may require local permitting.

The above tank model is preset for a typical installation. Additional options and accessories are available. Feel free to call us at 1-800-433-8831 if you have any questions, or need an alternate setup.

Mark Description Mark Description
A Single Wall Fiberglass Tank H 4 in. NPT Grease Clean-Out Fitting
B FRP Hold Down Strap & Turnbuckle Assembly J Full Height Compartment Baffle
C Precast Deadman Anchor With Eyebolts K 2 in. x 8 in. Transfer Slot
D 23.5 in. Fiberglass Collar With Tank Access Opening L Grease Clean-out Riser With Cap
E 24 in. FRP Riser With Cover M Abovegrade Vent With Screen
F 4 in. PVC Inlet Piping With Sanitary Tee N 36 in. Access Manhole With Cover
G 4 in. PVC Outlet Piping With Sanitary Tee O 12 in. Access Manhole With Cover

THIS DRAWING IS FOR ILLUSTRATIVE PURPOSES
ONLY. IT IS THE RESPONSIBILITY OF THE
PURCHASER AND/OR ENGINEER TO DESIGN A
SYSTEM IN COMPLIANCE WITH ALL GOVERNING
MUNICIPAL CODES

Typical Install PDF

Fiberglass Access Collar Opening


    Access Collar Size Options:
  • 24 in. Outside Diameter
  • 30 in. Outside Diameter
  • 36 in. Outside Diameter
  • 48 in. Outside Diameter



FRP Riser With Cover


    Riser Size Options:
  • Diameter Options: 24 in., 30 in., 36 in., or 48 in.
  • Length Options: 24 in., 36 in., 48 in., 60 in., 72 in., or 84 in.



PVC Inlet/Outlet Piping With Sanitary Tee


    Pipe Diameter Options:
  • 4 inches
  • 6 inches
  • 8 inches
  • 10 inches
  • 12 inches



Grease Clean-Out Fitting


    Fitting Diameter Options:
  • 4 in. Steel NPT - Half or Full
  • 6 in. Steel NPT - Half or Full
  • 8 in. Steel NPT - Half or Full
  • 10 in. Steel NPT - Half
  • * Half fittings are threaded on one end, while full fittings are threaded on both ends



Flat Baffles


    Baffle Size Options:
  • Full Baffle
  • 7/8 Baffle
  • 1/2 Baffle



Abovegrade Vent With Screen


    Pipe Diameter Options:
  • 4 inches
  • 6 inches
    Contents Include:
  • (2) Sch. 40 PVC 90° Elbows
  • 60 in. Sch. 40 PVC Pipe
  • Bug Screen on One End
  • Threaded Male PVC Fitting



Deadman Anchoring Package


Containment Solutions, Inc. (CSI) can provide pre-fabricated deadmen anchors and turnbuckles for standard models of single-wall, double-wall and triple-wall underground fiberglass storage tanks. Deadmen anchors provide a means to prevent installed fiberglass tanks from floating out of the ground when the tank installation is subject to ground water around the tank. Deadmen anchors, when used with CSI fiberglass hold down straps and other CSI or contractor supplied hardware and installed according to CSI installation instructions, prevent tank flotation and cost less than a concrete pad under the tank.

CSI supplied deadmen allow the connection of the fiberglass hold down strap end to the deadman anchor point using wire rope, turnbuckles, or other mechanical connections. The deadmen are manufactured with slots that allow the anchor points to be easily moved along the deadmen for alignment with tank anchor points during installation.

Deadman Anchors PDF