*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Containment Solutions UGWT-SW-GI-6000-8 Underground Grease Interceptor
6,000 Gal. 8 Ft. Diameter, Single-Wall, Fiberglass
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | |
|---|---|---|---|
| UGWT-SW-GI-6000-8 | 6,000 Gal. 8 Ft. Diameter, Single-Wall, Fiberglass | Call For Price | |
Containment Solutions - UGWT-SW-GI-6000-8 - Underground Grease Interceptor
The above tank model is preset for a typical installation. Additional options and accessories are available. Feel free to call us at 1-800-433-8831 if you have any questions, or need an alternate setup.
Grease interceptors (also referred to as grease traps for smaller applications) are temporary storage /disposal tanks for wastewater in grease producing environments. Contaminants in this particular type of wastewater are
made up of fats, oils, and grease ( FOG ). As FOG materials cool they congeal in sewer lines causing massive blockages and costly back-ups.
A grease interceptor is designed to store wastewater long enough for the immiscible materials to naturally separate and float to the top of the water level where the FOG can be collected and disposed of properly. Typically this wastewater flows directly from a sink drain or wash area. Due to the unpredictable nature of contaminants, the storage vessel should be rust proof and non-corrosive which makes fiberglass an ideal structural material.
Any establishment that introduces grease, oil or any other FOG material into the sewer system in quantities large enough to cause line blockages is required to install a grease trap or interceptor.
Flowtite tanks are engineered to meet and exceed current requirements and standards. We offer IAPMO approved grease interceptors in various sizes up to 12 ft. diameter including fiberglass baffles and other accessories.
- Tank Length:
- - 19 ft. 5 in.
- Tank Weight:
- - 2,050 lbs.
Dimensions
- Restaurants
- Hotels
- Hospitals
- Schools
- Grocery Stores/Chains
- Food Service Kitchens
- Industrial Complexes
Typical Applications
This product requires a crane, (or when applicable a forklift) for offloading and placement.
This is also a product that may require local permitting.
The above tank model is preset for a typical installation. Additional options and accessories are available. Feel free to call us at 1-800-433-8831 if you have any questions, or need an alternate setup.
| Mark | Description | Mark | Description |
|---|---|---|---|
| A | Single Wall Fiberglass Tank | H | 4 in. NPT Grease Clean-Out Fitting |
| B | FRP Hold Down Strap & Turnbuckle Assembly | J | Full Height Compartment Baffle |
| C | Precast Deadman Anchor With Eyebolts | K | 2 in. x 8 in. Transfer Slot |
| D | 23.5 in. Fiberglass Collar With Tank Access Opening | L | Grease Clean-out Riser With Cap |
| E | 24 in. FRP Riser With Cover | M | Abovegrade Vent With Screen |
| F | 4 in. PVC Inlet Piping With Sanitary Tee | N | 36 in. Access Manhole With Cover |
| G | 4 in. PVC Outlet Piping With Sanitary Tee | O | 12 in. Access Manhole With Cover |
THIS DRAWING IS FOR ILLUSTRATIVE PURPOSES
ONLY. IT IS THE RESPONSIBILITY OF THE
PURCHASER AND/OR ENGINEER TO DESIGN A
SYSTEM IN COMPLIANCE WITH ALL GOVERNING
MUNICIPAL CODES
Fiberglass Access Collar Opening
- Access Collar Size Options:
- 24 in. Outside Diameter
- 30 in. Outside Diameter
- 36 in. Outside Diameter
- 48 in. Outside Diameter
FRP Riser With Cover
- Riser Size Options:
- Diameter Options: 24 in., 30 in., 36 in., or 48 in.
- Length Options: 24 in., 36 in., 48 in., 60 in., 72 in., or 84 in.
PVC Inlet/Outlet Piping With Sanitary Tee
- Pipe Diameter Options:
- 4 inches
- 6 inches
- 8 inches
- 10 inches
- 12 inches
Grease Clean-Out Fitting
- Fitting Diameter Options:
- 4 in. Steel NPT - Half or Full
- 6 in. Steel NPT - Half or Full
- 8 in. Steel NPT - Half or Full
- 10 in. Steel NPT - Half * Half fittings are threaded on one end, while full fittings are threaded on both ends
Flat Baffles
- Baffle Size Options:
- Full Baffle
- 7/8 Baffle
- 1/2 Baffle
Abovegrade Vent With Screen
- Pipe Diameter Options:
- 4 inches
- 6 inches
- Contents Include:
- (2) Sch. 40 PVC 90° Elbows
- 60 in. Sch. 40 PVC Pipe
- Bug Screen on One End
- Threaded Male PVC Fitting
Deadman Anchoring Package
Containment Solutions, Inc. (CSI) can provide pre-fabricated deadmen anchors and turnbuckles for standard models of single-wall, double-wall and triple-wall underground fiberglass storage tanks. Deadmen anchors provide a means to prevent installed fiberglass tanks from floating out of the ground when the tank installation is subject to ground water around the tank. Deadmen anchors, when used with CSI fiberglass hold down straps and other CSI or contractor supplied hardware and installed according to CSI installation instructions, prevent tank flotation and cost less than a concrete pad under the tank.
CSI supplied deadmen allow the connection of the fiberglass hold down strap end to the deadman anchor point using wire rope, turnbuckles, or other mechanical connections. The deadmen are manufactured with slots that allow the anchor points to be easily moved along the deadmen for alignment with tank anchor points during installation.
Deadman Anchors PDF
- Typical Install PDF
- Grease Interceptor Specifications
- Fiberglass Storage Tanks Installation Instructions (2MB)
- Deadman Anchors PDF
- Flexible Connector Specification
- Access Riser Installation Instructions
- Grease Interceptor Warranty
- Fiberglass Storage Tanks Installation Instructions - FRENCH (2.5 MB)
Canada Literature
No reviews yet!
Be the first to add a review.
*Reviews are subject to approval