*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Facet CA Series 3 Coalescer Cartridges
Qualified to API-1581, 6 in. OD, Screw Base or Rod Mounting, Flow Direction: Inside to Outside
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| CA22-3SB | 6 in. x 22 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $228.15 | |
| CA28-3SB | 6 in. x 28 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $232.90 | |
| CA33-3SB | 6 in. x 33 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $290.10 | |
| CA38-3SB | 38 in. Length, Screw Base Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $302.32 | |
| CA43-3 | 43 in. Length, Rod Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $245.05 | |
| CA43-3SB | 43 in. Length, Screw Base Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $252.27 | |
| CA56-3 | 56 in. Length, Rod Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $336.18 | |
| CA56-3SB | 56 in. Length, Screw Base Mounting, Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $363.68 |
Facet - CA Series 3 - Coalescer Cartridges
Facet CA series 3 coalescer cartridges offer the finest performance available. This standard line of high flow coalescer cartridges removes ultra-fine solids and enhances separation of water from jet fuel.
The Facet coalescer separator housings equipped with CA Series 3 coalescer and companion separator cartridges have been tested and fully qualified to meet the performance requirements of API Bulletin 1581, Third Edition, Groups I and II, Classes A, B and C.
Built for balanced fluid flow-thru and structural strength, each CA Series 3 coalescer cartridge is a single-piece construction of various combined media, precisely arranged in many layers and pleats, wrapped around a treated, perforated metal center tube-all encased in an outer sock material. All are 6 in. OD (152 mm) by 3.5 in. ID (89 mm) and available in standard interchangeable nominal lengths in increments from 11.25 in. (290 mm) to 57.25 in. (1450 mm).
The CA Series 3 coalescer cartridges are available in two cartridge mounting styles; self-centering rod mount and screw base. The rod mount style has treated metal end caps, while the screw base ends are injection molded, glass-filled nylon. This screw base material offers superior strength and ease of maintenance-uniform threads, no shrinkage, no galling and no gasket to recover.
A permanently affixed Buna-N gasket seals against the V-type knife edge mounting adaptor to provide a positive seal. It will not separate from the cartridge during installation or change out.
Features
- Tested and qualified to the Third Edition of API Bulletin 1581, Group II, Classes A, B and C
- Multi-layered media for increased solids holding capacity
- Ultra-fine solids removal
- Maximum water coalescence
- Balanced cartridge flow characteristics
- Recommended maximum operating temperature: 240°F (115°C)
- Withstands in excess of 75 psi (517 kPa) differential pressure
- pH range from 5 to 9
- Choice of self-centering rod or screw base coalescer cartridge mounting styles
- Materials:
- All metal components are treated against corrosion
- Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
- Buna-N gaskets -- other materials are available on request
No reviews yet!
Be the first to add a review.
*Reviews are subject to approval