*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Morrison Brothers 710F Series Solenoid Valve
.75 in. - 3 in., Cast Bronze, Normally Closed
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 710F--0075 1V | .75 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,302.66 | |
| 710F12D0200 1V | with 12 Volt DC Coil, Flanged, 2 in. | $2,155.94 | |
| 710F2080200 1V | with 208 Volt AC Coil, Flanged, 2 in. | $2,155.94 | |
| 710F2080300 1V | with 208 Volt AC Coil, Flanged, 3 in. | $4,570.75 | |
| 710F2400200 1V | with 240 Volt AC Coil, Flanged, 2 in. | $2,155.94 | |
| 710F2400300 1V | with 240 Volt AC Coil, Flanged, 3 in. | $4,570.75 | |
| 710F24D0200 1V | with 24 Volt DC Coil, Flanged, 2 in. | $2,155.94 | |
| 710F48D0200 1V | with 48 Volt DC Coil, Flanged, 2 in. | $2,155.94 | |
| 710F--0100 1V | 1 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,685.80 | |
| 710F--0150 1V | 1.5 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $1,833.84 | |
| 710F--0200 1V | 2 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $2,155.94 | |
| 710F--0300 1V | 3 in., Bronze (FKM), Normally Closed, 120 AC Coil, Flanged | $4,570.75 | |
| 710FMO0200 1V | 2 in., Bronze (FKM), Normally Closed, 120V AC Coil, Flanged w/ Mechanical Overide | $2,269.69 |
Morrison Bros. Co. 710F Series Solenoid Valve - Normally Closed
710F Spec SheetNormally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level. They are generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.
Features:- Operates at 120 volts AC (24, 208, 220, 240, & 480 volts AC, and 12, 24, and 48 volts DC also available)
- Minimum operating temperature is -40°F
- Includes a continuous duty Class H standard coil. Other options are available
- Must be mounted in a horizontal pipeline with solenoid vertical and upright
- No differential pressure is required to open the valve
- Connects to a conduit. 18" lead wire provided
- Enclosure is watertight and rated for hazardous locations on aboveground fuel storage tanks- NEMA 3, 4X, 7 and 9; groups C and D
- Available in Viton or Teflon seals (3" only in Viton)
- Has a built-in expansion relief
- Flanged connections ANSI 150 RF
- Maximum viscosity rating of 60 Centistokes
- Manual overide feature available (Fig. 710FMO or 710FSM)
- Body: Cast bronze
- Seals: FKM
- CSA listed (File No. 108921, Model Z1314); Class I, Groups C and D; Class II, Groups E, F, and G. Class III, T3C
NOTE: It is strongly recommended that a line strainer with 100 mesh be installed at the inlet of this valve. Failure to do so may cause the valve to malfunction and void the warranty.
NOTE: Product can only be pumped in the direction of the flow arrow. Not designed for use as overfill prevention or process control valve.
No reviews yet!
Be the first to add a review.
*Reviews are subject to approval