GPI - 142100-04 - Heavy Duty Oil Transfer Pump

The GPI L-Series oil pump is ideal for use with new oil (up to 90 wt.), hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. It features a gerotor gear design and durable, lightweight cast aluminum housing. With a rugged 12-volt (dc) delivering flow rates up to 20 QPM (19 L/min.), or 115-/230-volt (ac) motor delivering flow rates up to 32 QPM (30 L/min.), it is engineered for long life and limited maintenance. The L-Series pump has a ball valve nozzle, an 8-ft. (2.5 m) dispensing hose, a telescoping suction pipe to fit tank depths between 15 and 40 in., and a factory-installed power cord.

• Thermally protected 0.4 HP motor is designed for long life and limited maintenance
• Specifically designed for use with medium viscosity fluids. NOT FOR USE WITH FUEL
• Weight-centering inlet base reduces tank stress and includes an easy-access strainer to protect pump from debris
• Wetted materials: aluminum, stainless steel, brass, steel, nitrile rubber & zinc plated steel
• Equipped with Safe Stop. 30 minute auto power down with easy reset protects motor
• Motor is cULus Listed. 1-yr warranty

Specifications:

• Input: 12V (DC)
• Fuse: 40 amps
• Type: Gerotor
• Motor RPMs: 1800
• Motor HP: 0.40
• Flow Rate: 20 QPM/5 GPM (19 L/min)
• Duty Cycle: 30 min on/30 min off
• Working Pressure: 50 PSI (3.45 bar)
• Wetted Materials: Aluminum|Stainless Steel|Zinc Plated Steel|Brass|NBR (Nitrile Butadiene Rubber)|Steel
• Inlet: 1 in. FNPT
• Outlet: 3/4 in. FNPT
• Mounting Type: Center Base, 2in. MNPT
• Suction Pipe: Polypropylene, Telescoping 15 to 40in. x 1in. MNPT
• Power Cord: 18 ft. (5.5m), 10/2 AWG, Factory Installed
• Dispensing Hose: 8 ft. (2.44 m) x 3/4 in.
• Nozzle: Spout, Thermoplastic
• Housing: Corrosion-Resistant Aluminum
• Warranty: 1-yr
• Approvals: cULus Motor Listed for Hazardous Locations Class I, Division 2, Group D USA and Canada