Above Ground Fuel Storage Tanks
When You Need Above Ground Storage
Above ground fuel storage tanks are for operations that go through enough fuel that transfer tanks and portable containers no longer make sense. If you are refueling a fleet every day, running heavy equipment on a long-term construction site, or operating a fueling station for farm equipment, a permanent or semi-permanent above ground tank is the practical solution.
Single-Wall vs. Double-Wall Tanks
Single-Wall Tanks: One layer of steel. Less expensive upfront but typically require a separate secondary containment structure — a concrete pad with a dike or a containment basin — to meet environmental regulations. TOPS carries single-wall fuel tanks (LC-SW series) from 60 gallons up to 5,000 gallons.
Double-Wall Tanks: Built-in secondary containment. The inner tank holds the fuel and the outer wall acts as the containment barrier. These meet most federal and state secondary containment requirements without needing additional site construction. TOPS double-wall tanks (LC-DW series) and double-wall cube tanks (DW-CT series) are available. Containment Solutions also manufactures double-wall above ground steel tanks for oil/water separator applications.
Underground Fiberglass Tanks
For permanent installations, Containment Solutions manufactures underground fiberglass petroleum tanks from 600 to 40,000 gallons. Fiberglass construction eliminates the corrosion concerns that affect buried steel tanks. We carry Containment Solutions underground tanks for petroleum, fire protection water, and potable water applications.
Farm Tanks
For agricultural operations, TOPS carries above ground farm tanks in 300 and 500 gallon sizes. These are designed for on-farm fuel storage and dispensing.
Generator and Day Tanks
For standby generator installations, Containment Solutions Gen Cube tanks provide UL Listed fuel storage. We also carry generator day tanks and sub-base tanks from Tramont.
Regulatory Considerations
Any above ground fuel tank over 1,320 gallons (or a facility with total storage over 1,320 gallons) falls under EPA SPCC regulations and requires a Spill Prevention, Control, and Countermeasure plan. Many states have additional requirements that kick in at lower thresholds.
Double-wall tanks simplify compliance because the secondary containment is built in. If you are installing at a commercial or industrial site, check your local fire code requirements before purchasing.
What Westech Carries
We carry above ground and underground fuel storage tanks from TOPS and Containment Solutions. TOPS carries single-wall and double-wall steel fuel tanks from 60 to 5,000 gallons, cube tanks, and farm tanks. Containment Solutions carries underground fiberglass tanks, above ground oil/water separator tanks, and Gen Cube generator tanks. We also carry the full range of tank equipment — valves, vents, fill caps, overfill prevention, gauges, and spill containment — from OPW, Morrison Bros., and Clay & Bailey.
Call us at 1-800-433-8831 for help sizing and specifying the right tank for your operation.
Frequently Asked Questions
Q: Do I need a single-wall or double-wall tank?
A: Double-wall tanks provide built-in secondary containment and meet most regulatory requirements without a separate containment basin. Single-wall tanks are less expensive but typically require additional containment construction. Check your local fire code.
Q: What sizes are available?
A: TOPS single-wall and double-wall tanks range from 60 to 5,000 gallons. Farm tanks are available at 300 and 500 gallons. Underground fiberglass tanks from Containment Solutions range from 600 to 40,000 gallons.
Q: What tank equipment do I need for a new installation?
A: At minimum you need fill caps or adapters, a vent, an emergency shutoff valve, a tank gauge, overfill prevention, and spill containment. Requirements vary by jurisdiction and tank size. Browse our Tank Equipment category or call us for a complete equipment list.