*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
Facet CAA28-5SB CAA - Series 5 - Coalescer Cartridges
6 in. x 28 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside
Ships From Manufacturer
Select Model & Quantity:
Model # | Description | Price | Qty |
---|---|---|---|
CAA28-5SB | 6 in. x 28 in., Qualified to API-1581, 6 in. OD, Flow Direction: Inside to Outside | $202.59 |
Facet - CAA28-5SB - CAA - Series 5 - Coalescer Cartridges
Facet CAA Series 5 coalescer cartridges offer the
finest performance available. This standard line of
high flow coalescer cartridges removes ultra-fine
solids and enhances separation of water from jet
fuel.
The Facet coalescer separator housings equipped
with CAA Series 5 coalescer and companion
separator cartridges have been tested and fully
qualified to meet the performance requirements
to EI 1581, Fifth Edition, Category C (Category C
replaces the previous class A, B, and C of API 1581
3rd Edition.)
Built for balanced fluid flow-thru and structural
strength, each CAA Series 5 coalescer cartridge is
a single-piece construction of various combined
media, precisely arranged in many layers and
pleats, wrapped around a coated, perforated metal
center tube-all encased in an outer sock material.
All are 6 in. OD (152 mm) by 31∕2 in. ID (89 mm) and
available in standard interchangeable nominal
lengths from 111∕4 in. (290 mm) to 571∕4 in. (1450 mm).
The CAA Series 5 coalescer cartridges are available
in two cartridge mounting styles: self-centering rod
mount and screw base. The rod mount style has
treated metal end caps, while the screw base ends
are injection molded, glass-filled nylon. This screw
base material offers superior strength and ease of
maintenance, uniform threads, no shrinkage, no
galling and no gasket to recover.
A permanently affixed Buna-N gasket seals against
the V-type knife edge mounting adaptor to provide
a positive seal. It will not separate from the cartridge
during installation or change out.
- Tested and qualified to the Fifth Edition of EI 1581, Category C
- Multi-layered media for increased solids holding capacity
- Ultra-fine solids removal
- Maximum water coalescence
- Balanced cartridge flow characteristics
- Recommended maximum operating temperature: 240°F (115°C)
- Withstands in excess of 75 psi differential pressure
- pH range from 5 to 9
- Screw base or open-end configuration
- Materials:
- All metal components are treated against corrosion
- Screw base ends are injection molded, glass-filled nylon with locked-in gaskets
- Buna-N gaskets --other materials are available on request