*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom
AMT Pumps 12SP10C-1P & 12SP10C-3P Self-Priming Chemical Pumps
11/4 in. Inlet/Outlet, Cast Iron, Single or Three Phase, 130 GPM, 1 HP
Ships From Manufacturer
Select Model & Quantity:
| Model # | Description | Price | Qty |
|---|---|---|---|
| 12SP10C-1P | 11/4 in. Inlet/Outlet, Cast Iron, Single Phase, 115-208/230 VAC/60 Hz, 130 GPM, 1 HP | $567.92 | |
| 12SP10C-3P | 11/4 in. Inlet/Outlet, Cast Iron, Three Phase, 208-230/460 VAC/60 Hz , 130 GPM, 1 HP | $567.92 |
AMT Pumps - 12SP10C-1P & 12SP10C-3P - Self-Priming Chemical Pumps
This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer and waste water drainage. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solid and EPDM/EPR seals for liquid transfer with specific gravities up to 1.2. (Verify chemical capability with liquids) Built-in check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Pumps feature Dual cycle 50/60 Hz TEFC motors.
- Cast Iron Construction with EPDM/EPR Seals
- Easy Cleanout Pull From Rear Design
- 1 in. to 2 in. NPT Port Sizes
- Maximum Temperature 180°F
- Maximum Flow 130 GPM
- Maximum Head 100 Ft. (43 PSI)
- Self-Priming up to 20 Feet with Built-in Check Valve
- Self-Cleaning, Clog Resistant Impeller
- 1/2 to 3 HP 56J Dual Cycle 50/60 Hz Single or Three Phase TEFC Motors
- Motors Feature 303 Stainless Steel Shaft
Stop! Required before ordering:
Please check the chemical resistance chart to determine if your pump is fit for your purpose, application and that the pump and seals are compatible for your use.
Warranty is subject to the proper selection of material and seals of the product you are pumping.
Chemical Resistance Chart
- Cast Iron Construction with EPDM/EPR Mechanical Seals
- Built-in Check Valve for Fast Priming
- NEMA 56J Motors with Stainless Steel Shafts
- Maximum Working Pressure 125 PSI
- Available in Dual 50/60 Hz TEFC, Single or Three Phase Motors
- Self-primes to 20 Ft.
- Self-cleaning, Clog Resistant Impellers
- Designed to handle liquids of specific gravities up to 1.3
- Do Not Use With Petroleum Based Liquids!
Model | HP∇ | Construction | Seal | VAC/60 Hz + | Phase(s) |
12SP10C-1P | 1 | Cast Iron | EPDM/EPR | 115-208/230 | 1 |
12SP10C-3P | 1 | Cast Iron | EPDM/EPR | 208-230/460 | 3 |
∇HP Class represents market category and is not intended to define actual horsepower
(+) 3-Phase motors can also operate on 50 Hz. (This will change full load amps, service factor and RPM)
Model | Curve | SUC* | DIS* | L** | W | H | Max. Solids Handling Cap. |
12SP10C-1P | C | 1¼ in. | 1¼ in. | 18.8[47.7] | 9.3[23.6] | 9.3[23.6] | 3/8 in. |
12SP10C-3P | C | 1¼ in. | 1¼ in. | 17.3[43.9] | 9.3[23.6] | 9.3[23.6] | 3/8 in. |
* Standard NPT (Female) Pipe Thread
** This dimension may vary due to engine manufacturer's specifications.
NOTE: Dimensions are in inches [centimeters] and have a tolerance of ± 1⁄8".
