API 676 Compliant Chemical/Corrosive Rotary Lobe Pump

*Image is a representation of this item. Actual item may vary.*
Hover over image to zoom

LobePro Rotary Pumps API-C Series API 676 Compliant Chemical/Corrosive Rotary Lobe Pump

72 - 2660 GPM, 50 - 175 PSI, 100-900 RPM

Ships From Manufacturer

Select Model & Quantity:

Model # Description Price
API-CS8p Proform Wet-end, 72 GPM, 175 PSI, 100-900 RPM Call For Price
API-CS16p Proform Wet-end, 144 GPM, 100 PSI, 100-900 RPM Call For Price
API-CM34 Overhanging Shafts, 204 GPM, 145 PSI, 100-600 RPM Call For Price
API-CM50 Overhanging Shafts, 300 GPM, 125 PSI, 100-600 RPM Call For Price
API-CM68 Overhanging Shafts, 408 GPM, 100 PSI, 100-600 RPM Call For Price
API-CM100 Overhanging Shafts, 600 GPM, 50 PSI, 100-600 RPM Call For Price
API-CL133 Overhanging Shafts, 665 GPM, 125 PSI, 100-500 RPM Call For Price
API-CL133h Fully Supported Shafts, 665 GPM, 175 PSI, 100-500 RPM Call For Price
API-CL266 Overhanging Shafts, 1330 GPM, 75 PSI, 100-500 RPM Call For Price
API-CL266h Fully Supported Shafts, 1330 GPM, 150 PSI, 100-500 RPM Call For Price
API-CL399 Overhanging Shafts, 1995 GPM, 40 PSI, 100-500 RPM Call For Price
API-CL399h Fully Supported Shafts, 1995 GPM, 85 PSI, 100-500 RPM Call For Price
API-CL531h Fully Supported Shafts, 2660 GPM, 70 PSI, 100-500 RPM Call For Price
Contact Us
LobePro Rotary Pumps - API-S Series - API 676 Compliant Sludge/Abrasive Rotary Lobe Pump
Typical applications for API pumps include fuel transfers; oil with abrasives; waste oil; crude oil; Vapor-liquid separator pump (aka flash drum pump, knock-out drum pump, compressor suction/ inlet drum pump); Induced Gas Flotation (IGF) froth pump; skim oil pump; desand slop pump; Produced Water Filtration Pump and highly viscous or abrasive chemicals. However there are many other applications because of the Properties of Rotary Lobe Pumps.

The nomenclature below describes the standard pump frame size, capacity, pressure capability, drive shaft arrangement, application and the serial number. Other options are available. Most common are listed below. Example: The pump series described above is a large rotary pump with rated capacity of 266 gallons per 100 revolutions. The pump is for high pressure application with a bottom drive shaft, pumping an extremely abrasive material. This pump also features: LARS.D.EN.F Cartridge Seals, Regular Drain Plugs, ANSI Standard Steel Transition Fittings, AGI 600 Housing Segments, NBR Orings, AR500 Wear Plates, NBR 70 Coated 4 Wing Helix Lobes. The pump serial number is 123456.

Overall Rating

|

0 Review(s)


No reviews yet!

Be the first to add a review.

*Reviews are subject to approval